Abstract:Accurate simulation of lightning‐induced overvoltage for overhead distribution lines is helpful to prevent lightning trip accidents. An electromagnetic return‐stroke model was used to represent lightning and then a 3D finite‐difference time‐domain (FDTD) method was adopted to simulate the lightning‐induced overvoltage on a distribution line without a field‐line coupling model. How lightning‐induced overvoltage behave for different ground conductivity and varying distance between the distribution line and the lightning channel was analysed. The results showed that the overvoltage waveforms at the centre point of the line corresponding to lightning strikes on the lossy ground and an ideal ground (σ = ∞) were similar; however, the peak amplitudes of the waveform were affected by soil conductivity at a close distance. The relationship between magnitude of the overvoltage and distance can be described by a second‐order exponential decay equation. Finally, the overvoltage calculated using the proposed model was compared with those obtained based on Agrawal's model and measurements made using the newly developed intelligent insulator on site. From these comparisons, it could be concluded that the FDTD method with the electromagnetic return‐stroke model produces reasonably accurate results of the attenuated oscillation waveform, which can better reproduce the overvoltage on operational distribution lines.

Calculation of Lightning-Induced Voltages on Overhead Distribution Lines Including Insulation Breakdown

A Regionalized Evaluation Method for Indirect Lightning Stroke Flashover Rate in 10kv Distribution Networks

Statistical Method of Lightning Current Amplitude Distribution Along Transmission Line Corridor

Calculation of Lightning Flashover Rates of Overhead Distribution Lines Considering Direct and Indirect Strokes

Calculation Of Lightning-Induced Voltages For Power Distribution Lines

Estimating flashover occurrence in distribution lines: A novel approach focused on the current-peak-to-distance ratio

Effects of Lightning Channel Equivalent Impedance on Lightning Performance of Overhead Transmission Lines

Effects of Approximating Recorded Lightning Currents with CIGRE Waveforms on Computed Fast-Front Overvoltages and Critical Lightning Currents Causing Flashover to Overhead Transmission Lines

Calculation of the Lightning Induced Response on Overhead Transmission Lines Based on the Electric Field Representation Methods

Calculation Of Lightning Induced Voltages On Overhead Lines Using An Analytical Fitting Representation Of Electric Fields

Estimation of the minimum shielding failure flashover current for first and subsequent lightning strokes to overhead transmission lines

Simulation Calculation and Analysis of Lightning Induced Overvoltage on Power Distribution Lines

Calculation model of lightning induced overvoltage using PSCAD/EMTDC program for overhead distribution lines

Approaching to Rotated Lightning Strike on Transmission Line

Assessment of the Effects of the Electromagnetic Pulse on the Response of Overhead Distribution Lines to Direct Lightning Strikes

Calculation of Lightning Induced Voltage on 750 kV Double CircuitTransmission Lines on the Same Tower when Lightning Strikes Tower Top

Implementation of an analytical formulation for LEMP to assess the lightning performance of a distribution line

Overvoltages caused by direct lightning strokes to a hybrid overhead line

A Semi-Analytical Method to Evaluate Lightning-Induced Overvoltages on Overhead Lines Using the Matrix Pencil Method

Analysis and research prospect of lightning-induced voltages in overhead transmission lines

Evaluation of lightning‐induced overvoltage on a 10 kV distribution line based on electromagnetic return‐stroke model using finite‐difference time‐domain