Abstract:Accurate simulation of lightning‐induced overvoltage for overhead distribution lines is helpful to prevent lightning trip accidents. An electromagnetic return‐stroke model was used to represent lightning and then a 3D finite‐difference time‐domain (FDTD) method was adopted to simulate the lightning‐induced overvoltage on a distribution line without a field‐line coupling model. How lightning‐induced overvoltage behave for different ground conductivity and varying distance between the distribution line and the lightning channel was analysed. The results showed that the overvoltage waveforms at the centre point of the line corresponding to lightning strikes on the lossy ground and an ideal ground (σ = ∞) were similar; however, the peak amplitudes of the waveform were affected by soil conductivity at a close distance. The relationship between magnitude of the overvoltage and distance can be described by a second‐order exponential decay equation. Finally, the overvoltage calculated using the proposed model was compared with those obtained based on Agrawal's model and measurements made using the newly developed intelligent insulator on site. From these comparisons, it could be concluded that the FDTD method with the electromagnetic return‐stroke model produces reasonably accurate results of the attenuated oscillation waveform, which can better reproduce the overvoltage on operational distribution lines.

Indirect lightning performance of 10-kV overhead distribution lines

A Regionalized Evaluation Method for Indirect Lightning Stroke Flashover Rate in 10kv Distribution Networks

Statistical Method of Lightning Current Amplitude Distribution Along Transmission Line Corridor

Calculation Of Lightning-Induced Voltages For Power Distribution Lines

Evaluation of lightning‐induced overvoltage on a 10 kV distribution line based on electromagnetic return‐stroke model using finite‐difference time‐domain

Research on Lightning Protection of 220kv Substation with Long Cable Inlet Wire

Calculation of Lightning Flashover Rates of Overhead Distribution Lines Considering Direct and Indirect Strokes

Lightning Protection Simulation Analysis of 10kV Distribution Line

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Research on lightning intruding waves in 220 kV GIS substation

Simulation Calculation and Analysis of Lightning Induced Overvoltage on Power Distribution Lines

Approaching to Rotated Lightning Strike on Transmission Line

Analysis and research prospect of lightning-induced voltages in overhead transmission lines

Calculation of the Lightning Induced Response on Overhead Transmission Lines Based on the Electric Field Representation Methods

Scaled Experiment and Calculation of Induction Lightning Overvoltage on Distribution Line

Overvoltages caused by direct lightning strokes to a hybrid overhead line

Calculation of Lightning Induced Voltage on 750 kV Double CircuitTransmission Lines on the Same Tower when Lightning Strikes Tower Top

Lightning Performance of Quadruple-circuit Transmission Line with Dual Voltage 500/220 Kv on the Same Tower

Impact of Distribution Line Insulated Tower Head and Cross Arms on Lightning Surges in 10 Kv Substations

Calculation Of Lightning Induced Voltages On Overhead Lines Using An Analytical Fitting Representation Of Electric Fields

Induced voltage at two poles of 10kV parallel distribution line caused by direct lightning strike on the phase wire of adjacent line