Abstract:The mechanical properties of quench-tempered high-strength low-alloy steels are commonly optimized by fine and dispersively distributed alloy carbides. The role of the alloying elements in determining the alloy carbide precipitation sequence is of great significance. The co-addition of carbide-forming elements such as Mo, V and Nb complicates the precipitation behavior. The mutual inter-solutions and growth rates of various MC- and/or M2C-type carbides are qualitatively affected by the intrinsic solubility and diffusion at certain tempering condition. However, comprehensive study of the precipitation sequence must be followed with atomic scale resolution techniques. The 3D atom probe (3DAP) is a unique tool capable of obtaining chemical information at the atomic level, offering a powerful method to investigate microstructural and compositional changes occurring at nano-scale. And the sizes, morphology and composition of individual alloy carbide may be visualized and quantified by 3DAP. In this paper, a quenched Nb-V microalloyed steel was chosen to investigate the precipitation behavior of alloy carbide after tempering at 450-650 V for different times. 3DAP, micro-hardness test and TEM were applied to characterize the phenomena of hardening and softening during tempering, and the composition evolution and growth behaviors of the alloyed carbides were also studied. The results indicated the second hardening of the 500-600 degrees C tempering martensite is mainly resulting from precipitation strengthening of alloy carbides. The alloy carbides composition dynamically changed with elevated temperature or prolonged time, that is, the stronger carbide-forming elements replaced or partly replaced the weaker ones. At first V and Nb replaced Mo, and then Nb partly replaced V, and at last the carbides with certain composition were formed. Tempering time has relatively less effect on the carbides composition compared with temperature. When the tempering temperature elevated or tempering time prolonged, the alloying elements can obtain adequate diffusion energy and/or time, the plate-like carbides preferentially grow along the radial direction, and then grow along the thickness direction and start to coarsen.

Microstructural evolution and mechanical property changes of a new nitrogen-alloyed Cr–Mo–V hot-working die steel during tempering

Effect of Tempering Temperature on Microstructure and Properties of a New Type of Nitrogen‐Containing Hot‐Work Die Steel 3Cr7Mo2NiSiVN

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

Microstructure Evolution and Kinetics Analysis During Tempering of Mn–Ni–Mo Nuclear Power Forging Steel

Effect of tempering and deep cryogenic treatment on microstructure and mechanical properties of Cr–Mo–V–Ni steel

N-induced Microstructure Refinement and Toughness Improvement in the Coarse Grain Heat-Affected Zone of a Low Carbon Mo–V–Ti–B Steel Subjected to a High Heat Input Welding Thermal Cycle

Microstructural evolution and mechanical properties of 55NiCrMoV7 hot-work die steel during quenching and tempering treatments

Thermal stability and softening mechanism of a new type of high nitrogen hot-work die steel 3Cr5Mo2SiVN

Regulation Law of Tempering Cooling Rate on Toughness of Medium-Carbon Medium-Alloy Steel

The effect of nickel on the carbide precipitation behavior in Cr–Mo–V hot-working die steel

Effect of Tempering Heat Treatment on the Microstructure and Impact Toughness of a Ni-Cr-Mo-V Steel Weld Metal

Effect of Tempering on Microstructure Evolution and Mechanical Properties of X12CrMoWVNbN10-1-1 Steel

Structure–mechanical Property Relationship in a Low Carbon Nb–Cu Microalloyed Steel Processed Through a Three-Step Heat Treatment: the Effect of Tempering Process

3D Atom Probe Characterazation of Alloy Carbides in Tempering Martenite Ii. Growth

Microstructural Characteristics and Impact Fracture Behaviors of Low-Carbon Vanadium-Microalloyed Steel with Different Nitrogen Contents

Microstructural Stability and Softening Resistance of a Novel Hot-Work Die Steel

Effects of V-Nb microalloying on the microstructure and properties of spring steel under different quenching-tempering times

Microstructure Evolution and Mechanical Properties of X12CrMoWVNbN10-1-1 Steel During Quenching and Tempering Process

Thermodynamics of Phase Transformation and Microstructure Evolution of 18Cr2Ni4WA Carburized Steel during High‐Temperature Tempering

Investigation into the thermal stability of a novel hot-work die steel 5CrNiMoVNb

Nano-Sized Precipitation and Properties of A Low Carbon Niobium Micro-Alloyed Bainitic Steel