Abstract:Since the monumental work conducted by Whitesides et al. in 2007, research and development of paper-based microfluidics has been widely carried out, with its applications ranging from chemical and biological detection and analysis, to environmental monitoring and food-safety inspection. Paper-based microfluidics possesses several competitive advantages over other substrate materials, such as being simple, inexpensive, power-free for fluid transport, lightweight, biodegradable, biocompatible, good for colorimetric tests, flammable for easy disposal of used paper-based diagnostic devices by incineration, and being chemically modifiable. Myriad methods have been demonstrated to fabricate paper-based microfluidics, such as solid wax printing, cutting, photolithography, microembossing, etc. In this study, fabrication of paper-based microfluidics was demonstrated by spray on the printed paper. Different from the normally used filter papers, printing paper, which is much more accessible and cheaper, was utilized as the substrate material. The toner was intended to serve as the mask and the patterned hydrophobic barrier was formed after spray and heating. The processing parameters such as toner coverage on the printing paper, properties of the hydrophobic spray, surface properties of the paper, and curing temperature and time were systematically investigated. It was found that, after repetitive printing four times, the toner was able to prevent the hydrophobic spray (the mixture of PDMS and ethyl acetate) from wicking through the printing paper. The overall processing time for fabrication of paper-based microfluidic chips was less than 10 min and the technique is potentially scalable. Glucose detection was conducted using the microfluidic paper-based analytical devices (μPADs) as fabricated and a linear relationship was obtained between 1 and 10 mM.

Digitally Controlled Printing of Bioink Barriers for Paper-Based Analytical Devices: An Environmentally Friendly One-Step Approach

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Directly Writing Barrier-Free Patterned Biosensors and Bioassays on Paper for Low-Cost Diagnostics

3D Printed Paper-Based Microfluidic Analytical Devices

Rapid Fabrication of Paper-Based Microfluidic Analytical Devices with Desktop Stereolithography 3d Printer

A Low-Cost, Disposable and Portable Inkjet-Printed Biochip for the Developing World

Bioprint: A Liquid Deposition Printing System for Natural Actuators

Leveraging Arylboronic Acid–Cellulose Binding as a Versatile and Scalable Approach to Hydrophobic Patterning

Paper-based Analytical Devices Prepared with Polycaprolactone Printing and Their Application in the Activity Determination of Mulberry Extracts.

A low-cost and rapid microfluidic paper-based analytical device fabrication method: flash foam stamp lithography

Office paper and laser printing: a versatile and affordable approach for fabricating paper-based analytical devices with multimodal detection capabilities

Trends on Physical Understanding of Bioink Printability

Fabrication of a paper-based analytical device for multiple colorimetric analysis via inkjet-printing and paper-cutting

Digital Light 3D Printing of PEDOT-Based Photopolymerizable Inks for Biosensing

Papertronics: Integrating Electronics and Microfluidics on Paper for Sustainable Electroanalysis

Development of Paper Microfluidics with 3D-Printed PDMS Barriers for Flow Control

Improving quantitative control and homogeneous distribution of samples on paper-based analytical devices via drop-on-demand inkjet printing.

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper

Enhanced Performance of Colorimetric Biosensing on Paper Microfluidic Platforms Through Chemical Modification and Incorporation of Nanoparticles

Laser direct-writing to enable filtration in paper-based devices

Computationally Guided DIW Technology to Enable Robust Printing of Inks with Evolving Rheological Properties