Abstract:Since the monumental work conducted by Whitesides et al. in 2007, research and development of paper-based microfluidics has been widely carried out, with its applications ranging from chemical and biological detection and analysis, to environmental monitoring and food-safety inspection. Paper-based microfluidics possesses several competitive advantages over other substrate materials, such as being simple, inexpensive, power-free for fluid transport, lightweight, biodegradable, biocompatible, good for colorimetric tests, flammable for easy disposal of used paper-based diagnostic devices by incineration, and being chemically modifiable. Myriad methods have been demonstrated to fabricate paper-based microfluidics, such as solid wax printing, cutting, photolithography, microembossing, etc. In this study, fabrication of paper-based microfluidics was demonstrated by spray on the printed paper. Different from the normally used filter papers, printing paper, which is much more accessible and cheaper, was utilized as the substrate material. The toner was intended to serve as the mask and the patterned hydrophobic barrier was formed after spray and heating. The processing parameters such as toner coverage on the printing paper, properties of the hydrophobic spray, surface properties of the paper, and curing temperature and time were systematically investigated. It was found that, after repetitive printing four times, the toner was able to prevent the hydrophobic spray (the mixture of PDMS and ethyl acetate) from wicking through the printing paper. The overall processing time for fabrication of paper-based microfluidic chips was less than 10 min and the technique is potentially scalable. Glucose detection was conducted using the microfluidic paper-based analytical devices (μPADs) as fabricated and a linear relationship was obtained between 1 and 10 mM.

Office paper and laser printing: a versatile and affordable approach for fabricating paper-based analytical devices with multimodal detection capabilities

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

Rapid Fabrication of Paper-Based Microfluidic Analytical Devices with Desktop Stereolithography 3d Printer

Capture and characterisation of microplastics printed on paper via laser printer's toners.

3D Printed Paper-Based Microfluidic Analytical Devices

Digitally Controlled Printing of Bioink Barriers for Paper-Based Analytical Devices: An Environmentally Friendly One-Step Approach

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Papertronics: Integrating Electronics and Microfluidics on Paper for Sustainable Electroanalysis

Fabrication of paper-based microfluidic devices by octadecyltrichlorosilane self-assembling and uv-patterning

Laser-ablated acoustofluidics-driven paper devices for controllable chemical engineering in color display applications

Laser-etched grooves for rapid fluid delivery for a paper-based chemiresistive biosensor

Low-cost Bioanalysis on Paper-Based and Its Hybrid Microfluidic Platforms.

Paper-based microfluidic devices: Fabrication, detection, and significant applications in various fields

Origami microfluidic paper-analytical-devices (omPAD) for sensing and diagnostics

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper

Lab-on-paper micro- and nano-analytical devices: Fabrication, modification, detection and emerging applications

Fabrication of paper-based microfluidic analysis devices: a review

Fabrication of a laser-directed electrochemical paper analytical device and its deployment for multi-functional electrochemical sensing

Paper based microfluidic devices: a review of fabrication techniques and applications

Directly Writing Barrier-Free Patterned Biosensors and Bioassays on Paper for Low-Cost Diagnostics

Paper-Based Sensors: Affordable, Versatile, and Emerging Analyte Detection Platforms