Abstract:Purpose This paper aims to investigate the preparation of AlN and Al 2 O 3 , as well as the effect of nano-AlN and nano-Al 2 O 3 , on friction and wear properties of copper-steel clad plate immersed in the lubricants. Design/methodology/approach Nano-AlN or nano-Al 2 O 3 (0.1, 0.2, 0.3, 0.4 and 0.5 Wt.%) functional fluids were prepared. Their tribological properties were tested by an MRS-10A four-ball friction tester and a ball-on-plate configuration, and scanning electron microscope observed the worn surface of the plate. Findings An increase in nano-AlN and Al 2 O 3 content enhances the extreme pressure and anti-wear performance of the lubricant. The best performance is achieved at 0.5 Wt.% of nano-AlN and 0.3 Wt.% of nano-Al 2 O 3 with PB of 834 N and 883 N, a coefficient of friction (COF) of approximately 0.07 and 0.06, respectively. Furthermore, the inclusion of nano-AlN and nano-Al 2 O 3 particles in the lubricant enhances its extreme pressure performance and reduces wear, leading to decreased wear spot depth. The lubricating effect of the nano-Al 2 O 3 lubricant on the surface of the copper-steel composite plate is slightly superior to that of the nano-AlN lubricant, with a COF reaching 0.07. Both lubricants effectively fill and lubricate the holes on the surface of the copper-steel composite plate. Originality/value AlN and Al 2 O 3 as water-based lubricants have excellent lubrication performance and can reduce the COF. It can provide some reference for the practical application of nano-water-based lubricants. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2023-0255/

Preparation of Copper‐containing Nanocomposites by Thermolysis of Copper(II) Complex and Their Use as Anti‐friction and Anti‐wear Additives to Lubricant Oils

Preparation and Tribological Properties of Copper Nanoparticles As Lubricant Additive

Preparation,Characterization of Oil-soluble Copper Nanoparticles and the Tribological Property as Additive in SF15W/40 Lubricating Oil

Nanosized Copper Powders Prepared by Gel-Casting Method and Their Application in Lubricating Oil

Effect of copper oxide@boron nitride nanosheet hybrid nanocomposite on tribological properties of paraffin liquid

Preparation and Tribological Properties of Surface-Capped Copper Nanoparticle as a Water-Based Lubricant Additive

Research Progress of Nano Copper Lubricant Additives on Engineering Tribology

In situ preparation of Cu-Mo-S nanoparticle additive with multi-functional tribological properties

The Application of Fibers and Nanoparticles in the Form of Copper-Based Powder Sintered Friction Material with Lubricant Cooling

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Insight into the tribological properties of cylinder liner-piston ring under the nano BNNs/Cu composite additive lubrication

Copper submicrospheres induced by pulsed laser-irradiation with enhanced tribology properties

Preparation and Properties of Copper-Oil-based Nanofluids

Copper phosphate nanosheets as high-performance oil-based nanoadditives: tribological properties and lubrication mechanism

Combined Effect of Phosphonium Ionic Liquid and Copper Oxide Nanopowder as Additives to the Bio-based Lubricant During Tribological Analysis

High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires

Design of experiments coupled with Bayesian optimisation for nanolubricant formulation

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Fabrication and Tribological Properties of Copper Matrix Solid Self-Lubricant Composites Reinforced with Ni/NbSe2 Composites

Sulfur-Containing Carbon Nanospheres as Lubricant Additives for Antiwear and Friction Reduction

Effect of nano-AlN, Al 2 O 3 on friction and wear properties of copper-steel clad plate immersed in the lubricants