Effect of nano-AlN, Al 2 O 3 on friction and wear properties of copper-steel clad plate immersed in the lubricants

Xiaoxuan Lin,Xiong Sang,Yuyan Zhu,Yichen Zhang

DOI: https://doi.org/10.1108/ilt-08-2023-0255

2024-01-25

Industrial Lubrication and Tribology

Abstract:Purpose This paper aims to investigate the preparation of AlN and Al 2 O 3 , as well as the effect of nano-AlN and nano-Al 2 O 3 , on friction and wear properties of copper-steel clad plate immersed in the lubricants. Design/methodology/approach Nano-AlN or nano-Al 2 O 3 (0.1, 0.2, 0.3, 0.4 and 0.5 Wt.%) functional fluids were prepared. Their tribological properties were tested by an MRS-10A four-ball friction tester and a ball-on-plate configuration, and scanning electron microscope observed the worn surface of the plate. Findings An increase in nano-AlN and Al 2 O 3 content enhances the extreme pressure and anti-wear performance of the lubricant. The best performance is achieved at 0.5 Wt.% of nano-AlN and 0.3 Wt.% of nano-Al 2 O 3 with PB of 834 N and 883 N, a coefficient of friction (COF) of approximately 0.07 and 0.06, respectively. Furthermore, the inclusion of nano-AlN and nano-Al 2 O 3 particles in the lubricant enhances its extreme pressure performance and reduces wear, leading to decreased wear spot depth. The lubricating effect of the nano-Al 2 O 3 lubricant on the surface of the copper-steel composite plate is slightly superior to that of the nano-AlN lubricant, with a COF reaching 0.07. Both lubricants effectively fill and lubricate the holes on the surface of the copper-steel composite plate. Originality/value AlN and Al 2 O 3 as water-based lubricants have excellent lubrication performance and can reduce the COF. It can provide some reference for the practical application of nano-water-based lubricants. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2023-0255/

engineering, mechanical