Abstract:Effective thermal conduction between solid interfaces has emerged as a major bottleneck in heat dissipating heat from new-generation high-performance electronics. Gallium-based liquid metals (LMs), known for their high thermal conductivity, are gaining significant traction as thermal interface materials (TIMs) for enhanced thermal management. In this work, to address the key issues facing the application of gallium-based LMs as TIMs, including the lack of composition ratio data, poor coating performance and the need for improved thermal conductivity, two types of gallium-based LM-TIMs (Ga-In binary LM-TIMs and Ga-In-Sn ternary LM-TIMs) with different composition ratios were experimentally prepared, investigated and optimized. The thermal conductivities of the LM-TIMs at different temperatures (80 - 120 ℃) were tested, and the application reliability of the LM-TIMs was optimized by continuously destructing the oxide layer and filling micro copper particles. The influence of optimization parameters such as the duration of the destruction of oxide layer, the filling ratios of the particles and the particle size on the operation performance of the LM-TIMs was studied and analyzed. The results showed that the LM-TIMs exhibited excellent thermal conductivities of 29.6 - 38.5 W/(m·K), and the thermal conductivity increased with indium mass fraction and decreased with tin mass fraction. Significant improvements in coating performance were observed with the increase of the duration of destructing oxide layer, but it led to a reduction in thermal conductivity. Balancing coating performance and thermal conductivity, it was found that 30 min was the ideal duration. The filling of micro particles made up for the reduced thermal conductivity, and higher filling ratios and smaller particle sizes achieved better enhancement. In the experiment, a filling ratio of 5 % was appropriate because solidification occurred in LM-TIMs at higher filling ratios which weakened the thermal conductivity. This work provided valuable reference for the application and optimization of high thermal conductive gallium-based LM-TIMs.

A novel thermal conductive Ag2O paste for thermal management of light-emitting diode

Analysis of thermal spreading resistance in high power LED package and its design optimization

Experimental Investigation on Optimization of the Performance of Gallium-Based Liquid Metal with High Thermal Conductivity As Thermal Interface Material for Efficient Electronic Cooling

Systematic Investigation and Characterization of Ag Paste for LED Die Attach

High Electrical and Thermal Conductivity of Nano-Ag Paste for Power Electronic Applications

A Novel Heat Dissipation Material for High-Brightness Light-Emitting-diode Devices

Improved Thermal Performance of High-Power Led by Using Low-Temperature Sintered Chip Attachment

Development of Silver Paste With High Sintering Driving Force for Reliable Packaging of Power Electronics

Effects of Bonding Materials on Optical–Thermal Performances and High-Temperature Reliability of High-Power LED

Polymer Reinforced Solder Paste for Improving Impact Energy Absorption Capability in Micro LED Laser-Assisted Mass Transfer

Enhanced Optical–Thermal Performances of High-Power LED by Plated Copper on Thick Film Ceramic Substrate

Low temperature sintering of MOD assisted Ag paste for die-attach application

High‐Yield‐Stress Particle‐Stabilized Emulsion for Form‐Factor‐Free Thermal Pastes with High Thermal Conductivity, Stability, and Recyclability (Adv. Mater. Interfaces 6/2024)

A Novel Preparation of Ag Agglomerates Paste with Unique Sintering Behavior at Low Temperature

Rapid preparation of sintered Ag nanoparticles pastes for high-power electronic packaging

Study on low-temperature evaporation of Ag 2 O-based Ag electrode and electron injection layer and their application in OLEDs

Formation of a Highly Conductive Thick Film by Low-Temperature Sintering of Silver Paste Containing a Bi2O3-B2O3-ZnO Glass Frit

ZnO nanostructure as an efficient heat spreader in electronic packaging

Heat Dissipation Enhancement of High-Power LEDs Through Compact Ceramic Substrate Integrated With Microchannel

Low-Temperature Sintering of Ag Composite Pastes with Different Metal Organic Decomposition Additions

Investigation of 1-hexanol base silver paste formula for low-temperature sintering