Abstract:In this study, Na as the n‐type dopant is introduced in the polycrystalline Bi2Te3 material for enhancing the thermoelectric and mechanical properties. Benefitting from the synergistic optimization of electrical and thermal transport properties, a maximum ZT value of 1.03 is achieved at 303 K for the Bi2Te3‐0.25 wt% sample, which is 70% higher than that of the pristine sample. The recent growing energy crisis draws considerable attention to high‐performance thermoelectric materials. n‐type bismuth telluride is still irreplaceable at near room temperature for commercial application, and therefore, is worthy of further investigation. In this work, nanostructured Bi2Te3 polycrystalline materials with highly enhanced thermoelectric properties are obtained by alkali metal Na solid solution. Na is chosen as the cation site dopant for n‐type polycrystalline Bi2Te3. Na enters the Bi site, introducing holes in the Bi2Te3 matrix and rendering the electrical conductivity tunable from 300 to 1800 Scm–1. The solid solution limit of Na in Bi2Te3 exceeds 0.3 wt%. Owing to the effective solid solution, the Fermi level of Bi2Te3 is properly regulated, leading to an improved Seebeck coefficient. In addition, the scattering of both charge carriers and phonons is modulated, which ensured a high‐power factor and low lattice thermal conductivity. Benefitting from the synergistic optimization of both electrical and thermal transport properties, a maximum figure of merit (ZT) of 1.03 is achieved at 303 K when the doping content is 0.25 wt%, which is 70% higher than that of the pristine sample. This work disclosed an effective strategy for enhancing the performance of n‐type bismuth telluride‐based alloy materials.

Thermal-Driven Cobalt Intercalation Enhances Thermoelectric ZT of n-Type Bi 2 Te 2.7 Se 0.3

Isotropic Thermoelectric Performance of Layer-Structured n-Type Bi 2 Te 2.7 Se 0.3 by Cu Doping

Achieving High Thermoelectric Performance Through Constructing Coherent Interfaces and Building Interface Potential Barriers in N-Type Bi2Te3/Bi2Te2.7Se0.3 Nanocomposites

Synergistic Improvement of BiI3 and In on Thermoelectric Properties of Zone-Melted n-Type Bi2Te2.7Se0.3

Synergistical Enhancement of Thermoelectric Properties in N‐type Bi2O2Se by Carrier Engineering and Hierarchical Microstructure

Realizing High Thermoelectric Performance in Cu2Te Alloyed Cu1.15In2.29Te4

Fine-Tuning Bi2Te3-Copper Selenide Alloys Enables an Efficient n-Type Thermoelectric Conversion

Thermoelectric Performance Enhancement in N -Type Bi 2 (tese) 3 Alloys Owing to Nanoscale Inhomogeneity Combined with a Spark Plasma-Textured Microstructure

Enhanced Thermoelectric Performance of Cu2SnSe3 by Synergic Effects Via Cobalt-Doping

High Thermoelectric Performance of SnTe Via in Doping and Cu1.75Se Nanostructuring Approach

Enhanced Thermoelectric Performance of N-Type Bi2Te2.7Se0.3 by Pyrite CoSe2 Addition

Enhancing thermoelectric performance of n-type Bi6Cu2Se4O6 through introducing transition metal elements

Enhanced Near-Room Temperature Thermoelectric Performance and Mechanical Strength of N-Type BiTeSe Materials Incorporated with Ag2Se Inclusions

Modulation Doping Enables Ultrahigh Power Factor and Thermoelectric ZT in n‐Type Bi 2 Te 2.7 Se 0.3

Enhanced Thermoelectric Performance in N-Type Bi2Te3-Based Alloys Via Suppressing Intrinsic Excitation.

Ultralow lattice thermal conductivity and enhanced power generation efficiency realized in Bi2Te2.7Se0.3/Bi2S3 nanocomposites

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

High Thermoelectric Performance of N-Type PbTe1−S Due to Deep Lying States Induced by Indium Doping and Spinodal Decomposition

High-Temperature Thermoelectric Monolayer Bi2TeSe2 with High Power Factor and Ultralow Thermal Conductivity

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

Integrating band engineering with point defect scattering for high thermoelectric performance in Bi2Si2Te6