Abstract:The current method of dynamic rail profile measurement involves the installation of a line-structured light sensor at the base of the train. The accuracy of this measurement is influenced by the vertical relationship between the laser plane of the light sensor and the longitudinal direction of the rail (LDR). When a train travels in a straight line, the normal of the laser plane aligns with the LDR. However, when the train curves, the angle at which its wheels connect with the rails causes the laser plane's normal direction to deviate from the LDR, leading to measurement errors. To address this issue, we propose a method for curved rail profile measurement using a dual-beam laser to correct these errors. This method involves generating an auxiliary 3D rail reflecting the LDR and a virtual 3D rail reflecting the normal direction of the laser plane from the cross-section image of the dual-beam laser. An optimization function is then formulated to determine the optimal auxiliary plane (optimal-AP) by analyzing the alignment or intersection between the auxiliary and virtual 3D rails. Distorted contour points are projected onto the optimal-AP to rectify errors. Experiments validate the accuracy and effectiveness of this proposed method. The results show that, regardless of pitch or yaw movement between the laser plane and the LDR, the error in measuring corrected profile wear remains consistently below 0.10 millimeters, thereby meeting the accuracy standard for rail wear measurement. This approach rectifies measurement errors in curved rail profiles from a 3D perspective, ensuring accurate measurements even under complex working conditions. It also provides a valuable reference for error analysis and improving dynamic rail profile measurement accuracy.

Detection method of springback for linear guideway straightening using digital image correlation.

Dynamic Evaluation Method of Straightness Considering Time-Dependent Springback in Bending-Straightening Based on GA-BP Neural Network

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Vision-Based Position Deviation Measurement of Rail Corrugation Chord Measuring Points under Bi-Linear Laser Assistance

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

Two-dimensional Bending Springback Analysis and Test of T-rail

Load-stroke Model for Straightening the Warpage of T-rail

Springback after the Lateral Bending of T-Section Rails of Work-Hardening Materials

Modeling, simulation and experiment for straightening lateral bending of elevator guide rail

Analytical springback assessment and compensation in 3D multi-point flexible stretch bending forming

Research on springback compensation method of 3D flexible stretch bending of multi-point roller dies

Study on key technologies of straightening large-scale integrated part's distortion due to machining

Straightness Detection Method and Accuracy Analysis of Guide Rail Parts

Research on Control Technology of Variable Curvature Bending Springback Based on Iterative Compensation Method

A New Non- touch Type Testing Way to Bridge Deflection and Deformation

Research on springback characteristic in flexible multi-points 3D stretch-bending process

A Straightening Control System for the Linear Guide Rail

Error correction method based on dual-beam laser for curved rail profile measurement

Spatial variable curvature metallic tube bending springback numerical approximation prediction and compensation method considering cross-section distortion defect

Full-field deformation measurement and cracks detection in speckle scene using the deep learning-aided digital image correlation method

An efficient closed-form solution for springback prediction and compensation in elastic–plastic creep age forming