Abstract:Lightweight refractory high-entropy alloys (LRHEAs) exhibit lower density and better ductility than other refractory high-entropy alloys, which bestows upon them substantial prospects for application across diverse engineering domains. laser directed energy deposition additive manufacturing (LDED) technology emerges as an ideal process for preparing such refractory metals owing to its exceptional attributes, such as rapid cooling rates and design flexibility. In this study, a new LRHEA Al 0.3 NbTi 3 VZr 1.5 was fabricated by LDED, and a comprehensive investigation was conducted to explore the microstructure evolution and the plastic deformation mechanisms. A graded microstructure with body-centered cubic (BCC) matrix, Laves phases near grain boundaries, and coarsened ω particles in the matrix is detected in as-deposited samples. In solid solution treated (SST) samples, the Laves phase disappears, and the ω particles decrease in size, forming a nanoscale two-phase mixture with the matrix. The as-deposited samples exhibit distinct brittle fractures, with a fracture strength of 902 MPa and 1% fractured strain. While the SST samples exhibit a considerable fracture strain of about 25±2% with 1032±12 MPa yield strength and a specific yield strength of 180 MPa·g -1 ·cm 3 . The high strength is mainly attributed to the solid-solution strengthening, while the excellent ductility is achieved by activating the unique deformation mechanism, including the formation of multi-stage microbands and kinking. The refinement of microband spacing accommodates more plastic deformation, and cross-slip further refines the microbands spacing in three dimensions. Microband-induced kinking effectively relieves local stress concentration and slows fracture. This work provides new insights into the design and preparation of LRHEAs using additive manufacturing technology and makes a remarkable contribution to the comprehensive and in-depth understanding of their plastic deformation mechanisms.

V0.5Nb0.5ZrTi refractory high-entropy alloy fabricated by laser addictive manufacturing using elemental powders

High specific yield strength and superior ductility of a lightweight refractory high-entropy alloy prepared by laser additive manufacturing

Microstructure and mechanical properties of a refractory AlMo 0.5 NbTa 0.5 TiZr high-entropy alloy manufactured by laser-directed energy deposition

Microstructure and mechanical properties of Al-Fe-Sc-Zr alloy additively manufactured by selective laser melting

Selective Laser Melting of Gas Atomized Al–3.02Mg–0.2Sc–0.1Zr Alloy Powder: Microstructure and Mechanical Properties

The Effect of Laser Remelting during SLM on Microstructure and Mechanical Properties of CoCrFeNiNb0.25

Processing and characterization of crack-free 7075 aluminum alloys with elemental Zr modification by laser powder bed fusion

High-strength NbMoTaX refractory high-entropy alloy with low stacking fault energy eutectic phase via laser additive manufacturing

A novel Al-Cr-Sc-Zr alloy additively manufactured via laser directed energy deposition: Microstructure, phase analysis and mechanical properties

Double-phase Refractory Medium Entropy Alloy NbMoTi Via Selective Laser Melting (SLM) Additive Manufacturing

Cracking Behavior, Microstructure and Properties of Selective Laser Melted Al-Mn-Mg-Sc-Zr Alloy

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

Selective laser melting of the Al0.3CoCrFeNiCu high-entropy alloy: Processing parameters, microstructure and mechanical properties

Laser powder bed fusion of an Al-Cr-Fe-Ni high-entropy alloy produced by blending of prealloyed and elemental powder: process parameters, microstructures and mechanical properties

Formability, Microstructure, and Thermal Crack Characteristics of Selective Laser Melting of ZK60 Magnesium Alloy

Manufacturing and Analysis of High-Performance Refractory High-Entropy Alloy via Selective Laser Melting (SLM)

Numerical and experimental study of RHEAs surface morphology and defect in selective laser melting

Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting

Selective laser melting of Al-3.48Cu-2.03Si-0.48Sc-0.28Zr alloy: Microstructure evolution, properties and metallurgical defects

Microstructure and strengthening mechanisms of novel lightweight TiAlV0.5CrMo refractory high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

Microstructure and Mechanical Properties of an Er-Modified Al–Mg–Mn–Sc–Zr Alloy Processed by Selective Laser Melting