Abstract:Abstract In a data center, electronic equipment such as server and switches dissipate heat and the corresponding cooling systems contribute to typically 25–35% of total energy consumption. The heat load continues to increase as there is a greater need for miniaturization and convergence. In 2014, data centers in the U.S. consumed an estimated 70 billion kWh, representing about 1.8% of total U.S. electricity consumption. Based on current trend estimates, U.S. data centers are projected to consume approximately 73 billion kWh in 2020 [1]. Many research and strategies are adopted to minimize energy cost. The recommended dry bulb temperature for long-term operation and reliability for air cooling is between 18–27°C and the largest allowable inlet temperature range to operate at is between 5°C and 45°C with American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) enabling much broader allowable zones) [2]. But understanding a proper cooling system is very important especially for thermal management of IT equipment with high heat loads such as 1U or 2U multi-core, high-end servers and blade servers which provide more computing per watt. Many problems like high inlet temperature due to the mixing of hot air with cold air, local hot spots, lower system reliability, increased failure, and downtime may occur. Among many other approaches to managing high-density racks, in-row coolers are used in between racks to provide cold air and minimize local hot spots. This paper describes a computational study being performed by applying in-row coolers for different rack power configuration with and without aisle containment. The power, as well as the number of racks, are varied to study the effect of raised inlet temperature for the IT equipment in a Computational Fluid Dynamics (CFD) model developed in 6SigmaRoom with the help of built-in library items. A comparative analysis is also performed for a typical small-sized non-raised facility to investigate the efficacy and limitations of in-row coolers in thermal management of IT equipment with variation in rack heat load and containment. Several other aspects like a parametric study of variable opening areas of duct between racks and in-row coolers, the variation of operating flow rate and failure scenarios are also studied to find proper flow distribution, uniformity of outlet temperature and predict better performance, energy savings and reliability. The results are presented for general guidance for flexible and quick installation and safe operation of in-row coolers to improve thermal efficiency.

Packing computing servers into the vessel of an underwater data center considering cooling efficiency

Optimal Design and Modeling of Server Cabinets With In-Row Coolers and Air Conditioning Units in a Modular Data Center

Ocean warming events resilience capability in underwater computing platforms

An Offloading Strategy for Ocean Edge Computing Based on Whale Optimization Algorithm

Enough Hot Air: The Role of Immersion Cooling

Simulation Study of Modular Independent Cooling Systems for Servers

Real-time optimization of the liquid-cooled data center based on cold plates under different ambient temperatures and thermal loads

An Offloading Strategy for Ocean Edge Computing Based on Game Theory

Study on the Operation Strategy of the Water Cooling System in the Single-Phase Immersion Cooling Data Center Considering Cooling Tower Performance

Unmanned Aerial Vehicle Aided Hybrid Two-Tier Maritime Edge Computing Networks

Performance analysis and optimization of free cooling strategies for a liquid-cooled data center

Optimization of Cooling Operation Strategy for Server Cabinets Based on Air-Cooled Chiller

Design of One-Dimensional Heat Conduction Model for Thin-Walled Fin in Submarine Data Center

A Combined Cooling Solution for High Heat Density Data Centers Using Multi-Stage Heat Pipe Loops

A multi-objective optimization of a single-phase immersion cooling system at cabinet level

Study on distributed cooling system for data centers

An optimization method for uniform flow distribution in the manifold of server cabinet

Communication-Aware Container Placement and Reassignment in Large-Scale Internet Data Centers

Parameters of Performance: A Deep Dive into Liquid-to-Air CDU Assessment

An open-source and experimentally guided CFD strategy for predicting air distribution in data centers with air-cooling

Thermal-aware layout planning for heterogeneous datacenters