Abstract:Abstract In a data center, electronic equipment such as server and switches dissipate heat and the corresponding cooling systems contribute to typically 25–35% of total energy consumption. The heat load continues to increase as there is a greater need for miniaturization and convergence. In 2014, data centers in the U.S. consumed an estimated 70 billion kWh, representing about 1.8% of total U.S. electricity consumption. Based on current trend estimates, U.S. data centers are projected to consume approximately 73 billion kWh in 2020 [1]. Many research and strategies are adopted to minimize energy cost. The recommended dry bulb temperature for long-term operation and reliability for air cooling is between 18–27°C and the largest allowable inlet temperature range to operate at is between 5°C and 45°C with American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) enabling much broader allowable zones) [2]. But understanding a proper cooling system is very important especially for thermal management of IT equipment with high heat loads such as 1U or 2U multi-core, high-end servers and blade servers which provide more computing per watt. Many problems like high inlet temperature due to the mixing of hot air with cold air, local hot spots, lower system reliability, increased failure, and downtime may occur. Among many other approaches to managing high-density racks, in-row coolers are used in between racks to provide cold air and minimize local hot spots. This paper describes a computational study being performed by applying in-row coolers for different rack power configuration with and without aisle containment. The power, as well as the number of racks, are varied to study the effect of raised inlet temperature for the IT equipment in a Computational Fluid Dynamics (CFD) model developed in 6SigmaRoom with the help of built-in library items. A comparative analysis is also performed for a typical small-sized non-raised facility to investigate the efficacy and limitations of in-row coolers in thermal management of IT equipment with variation in rack heat load and containment. Several other aspects like a parametric study of variable opening areas of duct between racks and in-row coolers, the variation of operating flow rate and failure scenarios are also studied to find proper flow distribution, uniformity of outlet temperature and predict better performance, energy savings and reliability. The results are presented for general guidance for flexible and quick installation and safe operation of in-row coolers to improve thermal efficiency.

Simulation Study of Modular Independent Cooling Systems for Servers

Simulation, Experimentation, and Collaborative Analysis of Adjacent Heat Exchange Modules in a Vehicular Cooling System

Optimal Design and Modeling of Server Cabinets With In-Row Coolers and Air Conditioning Units in a Modular Data Center

Analytical Modeling of Forced-Air Cooling Heatsink by Considering Air Temperature Rise in Channel and Coupling of Multiple Heat Sources

Study on distributed cooling system for data centers

Enhancing heat transfer processes in 2U-Rack Servers: A study case employing thermal simulation and the Taguchi method

Design and performance research of integrated indirect liquid cooling system for rack server

Optimal thermal management on server cooling system to achieve minimal energy consumption based on air-cooled chiller

Characterization of a Rack-Level Thermosyphon-Based Cooling System

Optimal thermal management of server cooling system based cooling tower under different ambient temperatures

Optimization of Cooling Operation Strategy for Server Cabinets Based on Air-Cooled Chiller

An energy-environment coupled simulation framework for multi-scale and multi-facet evaluation of data center

A Simulation-Based Approach to Data Center Thermal Efficiency Optimization

Real-time optimization of the liquid-cooled data center based on cold plates under different ambient temperatures and thermal loads

Performance analysis and optimization of free cooling strategies for a liquid-cooled data center

Realization of practical vapor compression cooling system for multiprocessor tower server

Numerical study of fluid flow and temperature distributions in a data center

Investigation Of The Mechanism Of Temperature Rise In A Data Center With Cold Aisle Containment

Rack-Embedded Cooling Strategy and Its Exergy Analysis for Reduction of Power Consumption in Thermal Management Data Center

A Complete Model for Modular Simulation of Data Centre Power Load

Hybrid-Cooled Server Optimization for Air-Side Waste Heat Recovery Using Passive and Active Flow Control