Abstract:Abstract In a data center, electronic equipment such as server and switches dissipate heat and the corresponding cooling systems contribute to typically 25–35% of total energy consumption. The heat load continues to increase as there is a greater need for miniaturization and convergence. In 2014, data centers in the U.S. consumed an estimated 70 billion kWh, representing about 1.8% of total U.S. electricity consumption. Based on current trend estimates, U.S. data centers are projected to consume approximately 73 billion kWh in 2020 [1]. Many research and strategies are adopted to minimize energy cost. The recommended dry bulb temperature for long-term operation and reliability for air cooling is between 18–27°C and the largest allowable inlet temperature range to operate at is between 5°C and 45°C with American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) enabling much broader allowable zones) [2]. But understanding a proper cooling system is very important especially for thermal management of IT equipment with high heat loads such as 1U or 2U multi-core, high-end servers and blade servers which provide more computing per watt. Many problems like high inlet temperature due to the mixing of hot air with cold air, local hot spots, lower system reliability, increased failure, and downtime may occur. Among many other approaches to managing high-density racks, in-row coolers are used in between racks to provide cold air and minimize local hot spots. This paper describes a computational study being performed by applying in-row coolers for different rack power configuration with and without aisle containment. The power, as well as the number of racks, are varied to study the effect of raised inlet temperature for the IT equipment in a Computational Fluid Dynamics (CFD) model developed in 6SigmaRoom with the help of built-in library items. A comparative analysis is also performed for a typical small-sized non-raised facility to investigate the efficacy and limitations of in-row coolers in thermal management of IT equipment with variation in rack heat load and containment. Several other aspects like a parametric study of variable opening areas of duct between racks and in-row coolers, the variation of operating flow rate and failure scenarios are also studied to find proper flow distribution, uniformity of outlet temperature and predict better performance, energy savings and reliability. The results are presented for general guidance for flexible and quick installation and safe operation of in-row coolers to improve thermal efficiency.

Numerical study of fluid flow and temperature distributions in a data center

Analytical Modeling of Forced-Air Cooling Heatsink by Considering Air Temperature Rise in Channel and Coupling of Multiple Heat Sources

The Numerical Simulation of the Airflow Distribution and Energy Efficiency in Data Centers with Three Types of Aisle Layout

Study of hot air recirculation and thermal management in data centers by using temperature rise distribution

Numerical study on the optimal power distribution of server racks in a data center

Three computational methods for analysing thermal airflow distributions in the cooling of data centres

Optimal Design and Modeling of Server Cabinets With In-Row Coolers and Air Conditioning Units in a Modular Data Center

Investigation Of The Mechanism Of Temperature Rise In A Data Center With Cold Aisle Containment

Simulation study on Air Outlet of Data Center

Enhancing heat transfer processes in 2U-Rack Servers: A study case employing thermal simulation and the Taguchi method

Comparison of detached eddy simulation and standard k—ε RANS model for rack-level airflow analysis inside a data center

Numerical and experimental dataset for a retrofitted data center

Study on distributed cooling system for data centers

A Thermal Environmental Analysis Method for Data Centers

Effect of uneven heat load on the airflow uniformity and thermal performance in a small-scale data center

Optimal thermal management on server cooling system to achieve minimal energy consumption based on air-cooled chiller

Numerical Simulation of the Air Cooling System for Scientific Payload Rack on a Space Station

Experimental Research and Energy Effectiveness Analysis on Chip-Level Two-Stage Loop Thermosyphon System for Data Centre Free Cooling

Numerical study of flow and heat transfer on construction machinery detached vehicular cooling system

A Simulation-Based Approach to Data Center Thermal Efficiency Optimization

Conjugate Heat Transfer Modeling of a Cold Plate Design for Hybrid-Cooled Data Centers