Abstract:Vanadium oxynitride (VN x O y , x+y=1) is a metallic compound between vanadium oxides (VO, V 2 O 3 , V 2 O 5 ) and vanadium nitride (VN) which would have interesting properties and functions that potentially can be supplied for different applications. In this study, vanadium nitride and oxynitride thin films were obtained by reactive magnetron sputtering using vanadium targets, Ar as plasma carrier, and a mix of N 2 and O 2 as reactive gas. The ratio of mass flow between the two gases is maintained around O 2 :N 2 =1:20 during the process. To obtain crystalline phases of oxynitrides a post rapid thermal annealing (RTP) in Ar atmosphere at 600oC and 700oC for 5 minutes was done. The purpose of the study is to define the effect of the magnetron sputtering parameters, such as reactive gas flow rates, and annealing temperature on the composition, microstructure, and optical properties of the obtained vanadium oxynitride thin films. The characterization of obtained films includes the examination of thickness and morphology by the surface profiler and SEM; identifying crystal structures and further microstructural vibration modes of molecular polarizability by X-ray diffraction and Raman spectroscopy, respectively; evaluation of the chemical composition of films by XPS analysis; assessing of optical transmittance, reflectance, and absorbance by the UV-visible- NIR spectrometer. Experimental data reveal that the annealed films can be oxynitrides when the oxygen flow rate is below 0.25 sccm and the ratio of oxygen/nitrogen ≤1/20. The annealed vanadium oxynitride films in terms of their properties are closer to vanadium nitrides than to oxides: more metallic than semi-conductive with dark appurtenance and high optical absorbance across the spectrum between 200 and 900 nm. The optical absorbance reaches almost 90% around 300 nm and then slowly reduces to 70% at 900 nm. Thus, these films could be good optical shields. For practical usage, the deposition of O 2 :N 2 =1/20, O 2 <0.25 sccm, and 600oC annealing are recommended because of the truly low transmittance (<10%) through films.

Synthesis and Properties of Vanadium Oxide Nanocoatings on the Surface of Polycrystalline α-Al2O3

Atomic Layer Deposition of Vanadium Oxide Thin Films from Tetrakis(dimethylamino)vanadium Precursor

Phase composition and transformations in magnetron-sputtered (Al,V)2O3 coatings

Atomic Layer Deposition of Vanadium Dioxide and a Temperature-dependent Optical Model

Optical and electrical properties of vanadium oxides synthesized from alkoxides

(Digital Presentation) Fabrication and Characterization for Vanadium Oxynitride Thin Films By Magnetron Sputtering

Vanadium Oxide Nanoparticles Doped Polymer to Modulate Thermal Emissivity

Surface modification of ZrO2 nanopowder with oxovanadium species using slurry deposition and impregnation methods

Vanadium oxide surfaces and supported vanadium oxide nanoparticles

Vanadium Pentoxide Nanobelts and Nanorolls: from Controllable Synthesis to Investigation of Their Electrochemical Properties and Photocatalytic Activities

Preparation and characterization of vanadium-doped nickel oxide nanostructure deposited by dip-coating technique

Mechanical Properties of V-O-N Coatings Synthesized by Cathodic Arc Evaporation

The controlled deposition of metal oxides onto carbon nanotubes by atomic layer deposition: examples and a case study on the application of V2O4 coated nanotubes in gas sensing

Vanadium Dioxide Thin Films Synthesized Using Low Thermal Budget Atmospheric Oxidation

Vanadium oxide surface studies

Synthesis and Characterization of Vanadium Doped Zinc Oxide Thick Film for Chemical Sensor Application

Preparation of Transparent, Hard Thermochromic Polysiloxane/tungsten-Doped Vanadium Dioxide Nanocomposite Coatings at Ambient Temperature

Effect of vanadium precursor on dip-coated vanadium oxide thin films

Synthesis of Vanadium Dioxide Thin Films on Conducting Oxides and Metal–insulator Transition Characteristics

Nanomechanical properties of polycrystalline vanadium oxide thin films of different phase composition

The Effect of Doping on the Electrical Conductivity of Vanadium Oxide (V2O5) Films Doped with Nickel Oxide (NiO) Prepared via Pulsed Laser Deposition (PLD).