Abstract:Clay minerals are inexpensive, sustainable, and abundant natural minerals being considered as replacements for cement binders. For this purpose, clays have to be activated to improve their pozzolanic activity, i.e., to yield an amorphous aluminosilicate phase that can easily react with calcium hydroxide to form binding phases; additional calcium aluminosilicate hydrate and calcium aluminate hydrates. Activation plays a key role in boosting the cement replacing potential of clay minerals, with the key to understanding activation lying in the control of dehydroxylation. This work promotes mechanochemical activations for comprehensive executing, monitoring and understanding of the dehydroxylation during clay activation. We monitored the mechanochemical conditions, yield degree of amorphization and heat of hydration. Considering the lower dissipation of thermal energy and better control of amorphization mechanochemical conditions were set at 400 rpm for 2 h. Results point out to the disruption of the kaolinite structure on behalf of chemically bound water release and reorganization of Al chemical bonds. The results indicate that with an increase in TGA steps, there are shifts in kaolin dehydroxylation processes, such as water evaporation and spinel crystallization (DTA), as well as shifts in the respective IR bands. Additionally, there is an increase in specific surface area (BET) and a decrease in particle size (SEM, XRD). Calorimetry of the cement paste CEM I 52.5 N indicates an apparently higher thermal reactivity of the aluminate phase compared to the silicate phase as a function of the particle size distribution. The presence of the mechanochemically activated clay changed the morphology, particle size, specific surface area, amorphous content, and thus the availability of pozzolanic aluminum for cement hydration reactions, which is thereby accelerated. It was observed the aluminate phase exhibits higher reactivity. The hydration mechanisms of the silicate (C 3 S) and aluminate (C 3 A) phases as well as the depletion of SO 4 2– ions were affected. Consequently, mechanochemical processing can be utilized as a powerful tool to activate pozzolanic clay with cement-replacing potential.

Mineralogical characteristics influence the structure and pozzolanic reactivity of thermally and mechano-chemically activated meta-kaolinites

Calorimetric study of the pozzolanic potential developed by the mechanochemical activation of kaolin clay

The impact of mechanochemical activation on the physicochemical properties and pozzolanic reactivity of kaolinite, muscovite and montmorillonite

Mechanochemical activation of natural clay minerals: an alternative to produce sustainable cementitious binders – review

Structural features of thermally or mechano-chemically treated montmorillonite clays as precursors for alkali-activated cements production

A Lab-Scale Evaluation of Parameters Influencing the Mechanical Activation of Kaolin Using the Design of Experiments

Enhancing reactivity in muscovitic clays: Mechanical activation as a sustainable alternative to thermal activation for cement production

Advances in alkali-activation of clay minerals

Parametrization of Geopolymer Compressive Strength Obtained from Metakaolin Properties

Alkali activation of mechanically activated low-grade clay

Comparing the reactivity of different natural clays under thermal and alkali activation

The Metakaolin - A New Hydraulically Active Pozzolanic Additive

Thermal activation of illitic-kaolinitic mixed clays

Mechanical Properties and Reaction Kinetics of Alkali-Activated Metakaolin

Nanostructural Evolution of Calcium-Containing Alkali-Activated Metakaolin During High Temperature Exposure

Effect of Na + alkaline activation on the geopolymerization of a pure metakaolin at room temperature

Mechanism of Na2CO3 on Early Properties of Red Mud-Based Alkali-Activated Cementitious Materials

Effect of acid activation on structural evolution and surface charge of different derived kaolinites

Regulation of Reactivity of Calcined Ultrafine Kaolin Products

Atomistic Insights into Silicate Dissolution of Metakaolinite under Alkaline Conditions: Ab Initio Quantum Mechanical Investigation

Impact of Ca, Al, and Mg on reaction kinetics, pore structure, and performance of Fe‐rich alkali‐activated slag