Abstract:There are abundant oil and gas resources in carbonate reservoirs of Tarim Basin, and more than 90% come from fractured-caved carbonate. These fractured-caved reservoirs are formed by the superposition of large fracture zone and karstification. The fractured-caved bodies generally appear in strips along the fracture zone and are distributed irregularly in vertical and horizontal directions. In addition, the ultra-deep burial (6500-7500m) leads to strong heterogeneity of the reservoirs. This paper presents using horizontal wells to cross the fractured-caved bodies is an effective means to improve the economic profit of oil and gas field development. Based on geomechanical study, the development mechanism of high-quality fractured-caved bodies can be determined, the contradiction between multiple fractured-caved bodies and safe drilling can be solved, and the reservoir stimulation plan can be optimized. The study can provide quantitative data basis for well trajectory optimization, prediction of drilling safety window, determination of maximum build-up slope in deviated section, how to use one well to cross multiple fractured-caved bodies and optimization of reservoir stimulation program. The results show that the ultra-deep carbonate reservoirs are affected by four factors: faults, fractures, irregular karst and in-situ stress, resulting in strong heterogeneity and anisotropy of reservoir. Therefore, the probability of high-quality fractured-caved bodies encountered by well trajectory drilling in different directions and depths is different, and the stability of wellbore in different directions and deviation is also different. When the drilling trajectory crossed the fault zone, it experienced a large range of in-situ stress, so the stimulation effect varied greatly in different well sections. The geomechanical study of ultra-deep carbonate reservoirs shows that the strike of the fault is similar to the present in-situ stress, and it is easier to develop high-quality fractured-caved bodies in relatively weak stress environment. Through the study of the relationship between fracture system and in-situ stress, it provides a method to optimize the well trajectory in consideration of both high-quality reservoir and drilling engineering safety. On the basis of optimizing the best well trajectory, it can predict the safe drilling window more accurately, guide drilling through multiple fractured-caved bodies as much as possible, and implement reservoir stimulation effectively, laid a foundation for high-quality and high-yield drilling. So far, three carbonate reservoir oilfields’ 3D stress modelling have been completed and applied to well placement, drilling and development. The average oil production per well exceeds 300 tons under 6mm nozzle conditions.

Evolution of the stress and strain field in the tyra field during the Post-Chalk Deposition and seismic inversion of fault zone using informed-proposal Monte Carlo

A Bayesian Approach for In-Situ Stress Prediction and Uncertainty Quantification for Subsurface Engineering

Uncertainty Quantification of Fluid Leakage and Fault Instability in Geologic CO2 Storage

Geomechanical Modelling Application to Support Reservoir Selection for Carbon Dioxide Utilization and Storage

Overburden 4D seismic: Influence of stress and pore pressure changes accounting for elastic contrast between a reservoir and its anisotropic surrounding rocks

Analysis of a Complex Faulted CO2 Reservoir Using a Three-dimensional Hydro-geochemical-Mechanical Approach

Copula modeling and uncertainty propagation in field-scale simulation of CO$_2$ fault leakage

Uncertainty Quantification for Evaluating Impacts of Caprock and Reservoir Properties on Pressure Buildup and Ground Surface Displacement During Geological CO2sequestration

Assessing mechanical response of CO2 storage into a depleted carbonate reef using a site-scale geomechanical model calibrated with field tests and InSAR monitoring data

CO2 storage in deep saline aquifers: evaluation of geomechanical risks using integrated modeling workflow

A Multiscale Hydro‐geochemical‐mechanical Approach to Analyze Faulted CO2 Reservoirs

Prediction of stress components using the Beltrami-Michell method

Uncertainty quantification for CO2 sequestration and enhanced oil recovery

Simulation of the inelastic deformation of porous reservoirs under cyclic loading relevant for underground hydrogen storage

Three-Dimensional Coupled Temporal Geomechanical Model for Fault-Reactivation and Surface-Deformation Evaluation during Reservoir Depletion and CO2 Sequestration, Securing Long-Term Reservoir Sustainability

The Study and Application of In-situ stress Distribution in Ultra-deep Fractured-caved Carbonate Reservoirs

Monte Carlo simulation for uncertainty estimation on structural data in implicit 3-D geological modeling, a guide for disturbance distribution selection and parameterization

Estimation of Reservoir Fracture Properties from Seismic Data Using Markov Chain Monte Carlo Methods

Method and Application of Stress Inversion based on Strike, Dip, and Rake Data from Microseismic Focal Mechanisms and Fracture Network

A Numerical Study of Fault Reactivation Mechanisms in CO2 Storage

Markov chain Monte Carlo methods applied to the stochastic inversion of 1D viscoelastic parameters