Abstract:Abstract CO2 sequestration and injection projects are being intensively studied and conducted throughout the world. The CO2 has to be trapped below a caprock and the trap itself occurs in a complex geological setting which creates a complex geometrical model. Increased pore pressure may result in uplift of the formation and generation of new fractures or reactivation of existing structures that will generate preferred fluid flow pathways along which dissolved CO2 which may escape into the atmosphere or freshwater zones above, or result in seismicity in the region. In order to assess and mitigate these geomechanical risks, a thorough simulation coupling fluid flow through porous media and geomechanics of a realistic representation of the reservoir as well as the overburden is required. Many aspects of geomechanics and reservoir simulation coupling has been studied using idealized horizontal layer basin structures that share the same discretization of the reservoir for the two simulators, and few modeling studies of real reservoirs are carried out, but limited effort has been made for mitigating the fractures forming at the cap rock in a real reservoir. The shared earth model of a candidate shallow CO2 sequestration site in the state of Missouri was separately discretized before coupled simulation in the finite element software and reservoir simulator predicted fracture formations. A coupling module was developed which uses the relative spatial position of Finite Element nodes compared to Finite Difference grid blocks to relate the two simulation grids. Fluid flow properties such as reservoir pressure and fluid saturations are taken from the reservoir simulation and are fed into the finite element simulation model, from which a new state of stress together with new porosities and pseudo compressibility values are calculated and are used to update the reservoir model. Results of this study are used for predicting the best CO2 injection location and injection rates to provide maximum storage capacity and injection rates for safe sequestration. This approach also predicts the critical pore pressures which result in formation of extensional or shear fractures at different places in caprock. This knowledge is then used for determining type, time and amount of sealant to inject for mitigation of flow through caprock fractures so that storage of CO2 at required injection rate is maintained.

Uncertainty Quantification for Evaluating Impacts of Caprock and Reservoir Properties on Pressure Buildup and Ground Surface Displacement During Geological CO2sequestration

Uncertainty Quantification for Evaluating the Impacts of Fracture Zone on Pressure Build‐up and Ground Surface Uplift During Geological CO 2 Sequestration

Estimation of reservoir uplift, seismicity and failure likelihood during CO 2 injection through coupled reservoir simulation

Evaluating the Impact of Caprock and Reservoir Properties on Potential Risk of CO2 Leakage after Injection

An Uncertainty Quantification Framework for Studying the Effect of Spatial Heterogeneity in Reservoir Permeability on CO2 Sequestration

Uncertainty analysis of impact indicators for the integrity of combined caprock during CO2 geosequestration

Co2 Geological Sequestration Modelling And Injection Induced Fracturing Analysis Of The Caprock

A Feasibility Study of CO2geologic Sequestration Integrating Reservoir Simulation, Rock-Physics Theory, and Seismic Modeling

Global Sampling for Integrating Physics-Specific Subsystems and Quantifying Uncertainties of CO2 Geological Sequestration

Thermo-hydro-mechanical Modeling of CO 2 Sequestration System Around Fault Environment

Thermo-hydro-mechanical Modeling of CO<sub>2</sub> Sequestration System Around Fault Environment

Land Uplift Induced by Injection: a Feasible Method to Evaluate the Security of CO2 Capture and Sequestration Projects

Role of capillary pressure on carbon dioxide sequestration: mathematical analysis

Three-Dimensional Modeling of the Reactive Transport of Co2 and Its Impact on Geomechanical Properties of Reservoir Rocks and Seals

Uncertainty Quantification of Fluid Leakage and Fault Instability in Geologic CO2 Storage

Assessing mechanical response of CO2 storage into a depleted carbonate reef using a site-scale geomechanical model calibrated with field tests and InSAR monitoring data

Evaluation of Pressure Management Strategies and Impact of Simplifications for a Post-Eor CO2 Storage Project

Uncertainty Quantification of CO 2 Leakage Through a Fault with Multiphase and Nonisothermal Effects

A Parametric Study of Fault Mechanical Changes Associated with Geological Sequestration of Carbon Dioxide

Uncertainty Analysis of Geomechanical Responses: China’s First Offshore Carbon Capture and Storage Project