Abstract:Hybrid capacitive deionization (HCDI) is an emerging and promising technology for water desalination and has been extensively explored in recent years. Designing a structure-tailorable electrode material has been proved to be a valid strategy for achieving a higher salt adsorption capacity (SAC). In this study, MnO2 materials with tailorable phase compositions and crystallinities were prepared hydrothermally and then evaluated as electrodes for removal of ions from a NaCl solution in a membrane-free HCDI cell. MnO2 electrode materials tested in the HCDI system include poorly crystalline δ-MnO2 along with abundant amorphous phases (MnO2-1h); crystalline δ-MnO2 with plentiful amorphous MnO2 (MnO2-2h); MnO2 mixtures of α-, δ-, and amorphous MnO2 (MnO2-5h); and α-MnO2 nanowires with minor amorphous MnO2 (MnO2-12h). Our results revealed that the phase composition and the crystallinity of MnO2 materials govern their specific capacitances and thus the SAC values. When the cell voltage is 1.2 V, the lamellar-structured poorly crystalline MnO2-1h electrode with the lowest crystallinity demonstrates the highest SACs of 13.84 mg g–1 in 100 mg L–1 NaCl (1.71 mM) and 21.32 mg g–1 in 500 mg L–1 NaCl (8.56 mM) solutions, respectively. The desalination efficiencies of the MnO2−1h electrode are remarkable and much greater than other MnO2-based electrodes under similar conditions (e.g., NaCl concentrations, cell voltage, etc.). This study sheds light on the significance of understanding the fundamentals of both the phase composition and crystallinity in defining the desalination performance of MnO2 electrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c04101?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c04101</a>.Phase weight percentages of MnO2; pore, microstructure, and electrochemical characterization data of MnO2; Na+ fractions in cycled electrodes; schematic of the CDI device; N2 absorption–desorption isotherms and pore size distribution of MnO2; curves of CV, GCD, and IR drops of electrodes; comparison of the maximum SACs of electrodes with previous references; curves of recycling performance and the corresponding current response of the MnO2-1h electrode; and XRD patterns of the MnO2-1h electrode before and after desalination (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c04101/suppl_file/sc0c04101_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Half-disturbed spin desalination: Asymmetric high-spin states in MnO 2 accelerate charge transfer in capacitive deionization

Pseudocapacitive desalination via valence engineering with spindle-like manganese oxide/carbon composites

Efficient hybrid capacitive deionization with MnO2/g-C3N4 heterostructure: Enhancing Mn dz2 electron occupancy by interfacial electron bridge for fast charge transfer

Manganese doping strategy for enhanced capacitive deionization performance of MoS 2

Accelerating ion diffusion kinetics with an intensified interfacial electric field for efficient hybrid capacitive deionization

Spinel flowered-shaped MnCo2O4 nanocrystals for highly efficient capacitive desalination

Enhanced capacitive desalination of MnO2 by forming composite with multi-walled carbon nanotubes

Synthesis of Low-Crystalline MnO2/MXene Composites for Capacitive Deionization with Efficient Desalination Capacity

Mechanistic insight into the electrochemical absorption adsorption behaviour of Cd2+ and Na+ on MnO2 in a deionization supercapacitor

Delocalizing the d-electrons spin states of Mn site in MnO2 for anion-intercalation energy storage

Phase- and Crystallinity-Tailorable MnO 2 as an Electrode for Highly Efficient Hybrid Capacitive Deionization (HCDI)

Confinement and phase engineering boosting 1T phase MoS2/carbon hybrid for high‐performance capacitive deionization

The exploration and comparison of adsorption mechanisms in MnO 2 with different crystal structures for capacitive deionization

One-dimensional electrospinning nanomaterials toward capacitive deionization: Fundamentals, development, and perspectives

Local Electric Field Induced by Atomic‐Level Donor–Acceptor Couple of O Vacancies and Mn Atoms Enables Efficient Hybrid Capacitive Deionization

Pseudocapacitive Deionization of Saltwater by Mn3O4@C/Activated Carbon

Solar reduced graphene oxide decorated with manganese dioxide nanostructures for brackish water desalination using asymmetric capacitive deionization

An ion-accumulating effect in a hollow carbon bowl electrode: understanding the structure-enhanced volumetric desalination capacity and ion transport kinetics in capacitive deionization

Dual-confinement effect in metal oxide nanoparticles/MXene-reduced graphene oxide for high capacitive deionization performance

Novel MoS2/NOMC Electrodes with Enhanced Capacitive Deionization Performances

Na2MnSiO4/C as hybrid capacitive deionization electrode material to enhance desalination performance