Abstract:The growing trend of large power and high frequency in electromagnetic conversion applications urges advancements in the saturation magnetization ( M s ), effective permeability (mu e ) and core loss ( P cv ) of soft magnetic composites (SMCs). Such performance depends largely on the M s and coercivity ( H c ) of the magnetic alloys as the main component of the SMCs. It is however, difficult to simultaneously achieve large M s and low H c via binary and ternary alloy systems. Here, quaternary Fe 81-x Si 15 Co 4 Ni x (x = 0, 3, 6 at%) soft magnetic alloys have been designed with the effect of Ni addition on the microstructure and magnetic properties of the alloy revealed. On one hand, rational incorporation of Co and Ni maintains the relatively large M s . On the other hand, the Ni enters into the A2 lattice and promotes its transition into DO 3 ordered phase as confirmed by both experimental characterization and first-principles calculations. Such microstructural evolution gives rise to initially decreased magnetocrystalline anisotropy ( K 1 ) followed by increasing due to the competitive reduction effect of Ni addition and increment effect of DO 3 formation. The magnetostriction constants (A s ) increases monotonously from negative to positive values with raised Ni content. This is accompanied with the decrease in 90 degrees domain walls and increase in 180 degrees domain walls as revealed by Lorentz microscopy. Combined lowest K 1 and A s as well as optimized domain structure result in the lowest H c for the Fe 78 Si 15 Co 4 Ni 3 alloy. The corresponding SMCs exhibit excellent performance with the mu e of 160.6 and the P cv of 288.4 mW/cm 3 (50 mT, 100 kHz) combined with high M s of 177.3 emu/g, superior to other FeSi-based SMCs.

Optimization of magnetization and mechanical properties of Fe-Ni-based alloys by Response Surface Methodology

Magnetic Properties of Fe–50%Ni Alloy Fabricated by Metal Injection Molding

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Enhanced Elastocaloric Effect and Mechanical Properties of Fe-doped Ni–Mn–Al Ferromagnetic Shape Memory Alloys

Design of Fe-based nanocrystalline alloys with superior magnetization and manufacturability

Microstructure and Magnetic Properties of Fe–50%Ni Alloy Fabricated by Powder Injection Molding

Compositional Design and Microstructural Tuning of Fe–Si–Co Soft Magnetic Alloys with Enhanced Performance

Rapid Annealing Optimizing Magnetic Softness and Thermal Stability of Mn-Substituted Fe-Based Nanocrystalline Alloys

Design of Quaternary FeSiCoNi Soft Magnetic Alloys Towards Large-Power and High-Frequency Applications

Large Magnetocaloric Effect and Magnetoresistance in Fe and Co Co‐Doped Ni‐Mn‐Al Heusler Alloys

Accelerated Design for Magnetocaloric Performance in Mn-Fe-P-Si Compounds Using Machine Learning

Optimizing the High-Frequency Magnetic Properties of Soft Magnetic Composites Via Surface Nanoengineering

Soft Magnetic Composites Based on the Fe Elemental, Binary and Ternary Alloy Systems Fabricated by Surface Nitridation

Multiscale microstructural evolution of Fe–Ni–Al–Ti alloy with high magnetization

Integrated ab initio modelling of atomic ordering and magnetic anisotropy for design of FeNi-based magnets

Preparation of High Performance Sintered Soft Magnetic Alloy by Metal Injection Molding

A unique Fe-based soft magnetic alloy and its magnetic softening mechanism

Simultaneous enhancement of magnetic and mechanical properties in Ni-Mn-Sn alloy by Fe doping

Giant magnetoresistance, magnetostrain and magnetocaloric effects in a Cu-doped -textured Ni45Co5Mn36In13.2Cu0.8 polycrystalline alloy

High performance Fe-based nanocrystalline alloys with excellent thermal stability

Development of FeCoMnAl multi-principal element alloys and soft magnetic powder cores with excellent magnetic properties and high temperature magnetic stability