Abstract:The growing trend of large power and high frequency in electromagnetic conversion applications urges advancements in the saturation magnetization ( M s ), effective permeability (mu e ) and core loss ( P cv ) of soft magnetic composites (SMCs). Such performance depends largely on the M s and coercivity ( H c ) of the magnetic alloys as the main component of the SMCs. It is however, difficult to simultaneously achieve large M s and low H c via binary and ternary alloy systems. Here, quaternary Fe 81-x Si 15 Co 4 Ni x (x = 0, 3, 6 at%) soft magnetic alloys have been designed with the effect of Ni addition on the microstructure and magnetic properties of the alloy revealed. On one hand, rational incorporation of Co and Ni maintains the relatively large M s . On the other hand, the Ni enters into the A2 lattice and promotes its transition into DO 3 ordered phase as confirmed by both experimental characterization and first-principles calculations. Such microstructural evolution gives rise to initially decreased magnetocrystalline anisotropy ( K 1 ) followed by increasing due to the competitive reduction effect of Ni addition and increment effect of DO 3 formation. The magnetostriction constants (A s ) increases monotonously from negative to positive values with raised Ni content. This is accompanied with the decrease in 90 degrees domain walls and increase in 180 degrees domain walls as revealed by Lorentz microscopy. Combined lowest K 1 and A s as well as optimized domain structure result in the lowest H c for the Fe 78 Si 15 Co 4 Ni 3 alloy. The corresponding SMCs exhibit excellent performance with the mu e of 160.6 and the P cv of 288.4 mW/cm 3 (50 mT, 100 kHz) combined with high M s of 177.3 emu/g, superior to other FeSi-based SMCs.

Soft Magnetic Composites Based on the Fe Elemental, Binary and Ternary Alloy Systems Fabricated by Surface Nitridation

Fesial Soft Magnetic Composites with Nizn Ferrite Coating Produced Via Solvothermal Method

Correlating the microstructure, growth mechanism and magnetic properties of FeSiAl soft magnetic composites fabricated via HNO 3 oxidation

High-performance Fe–Si soft magnetic composites with controllable silicate/nano-Fe composite coating

Sodium Nitrate Passivation as a Novel Insulation Technology for Soft Magnetic Composites

Fabrication and Magnetic Properties of FeSiB-based Soft Magnetic Composites

Enhanced Magnetic Properties and Thermal Conductivity of FeSiCr Soft Magnetic Composite with Al<sub>2</sub>O<sub>3</sub> Insulation Layer Prepared by Sol-Gel Process

Fe-Based Soft Magnetic Composites with High B-S and Low Core Loss by Acidic Bluing Coating

High performance of Fe-based soft magnetic composites coated with novel nano-CaCO3/epoxy nanocomposites insulating layer

Formation mechanism and magnetic performance of Fe-Si soft magnetic composites coated with MnO-SiO2 composite coatings

Fe/amorphous-Al 2 SiO 5 composites fabricated by low-temperature solid-phase reaction densification achieve synergistically enhanced structural and soft magnetic properties

FeSiAl Soft Magnetic Composite with Double Al2O3 Insulation Layers for Simultaneous High Mechanical and Magnetic Properties

Preparation and magnetic performance optimization of FeSiAl/Al2O3–MnO–Al2O3 soft magnetic composites with particle size adjustment

Fabrication and Soft Magnetic Properties of Fe–Si–Cr Composites with Double-Insulating Layers Suitable for High-Frequency Power Applications

Fabrication and growth mechanism of iron oxide insulation matrix for Fe soft magnetic composites with high permeability and low core loss

FeSiCr-Based Soft Magnetic Composites with SiO2 Insulation Coating Prepared Using the Elemental Silicon Powder Hydrolysis Method

Magnetic Spectra of Soft Magnetic Composites Based on Fe-Si-Cr-B Amorphous and Carbonyl-Iron Powders

Design of Quaternary FeSiCoNi Soft Magnetic Alloys Towards Large-Power and High-Frequency Applications

Synthesis of well-insulated Fe–Si–Al soft magnetic composites via a silane-assisted organic/inorganic composite coating route

Preparation of Fe–Si–Ni soft magnetic composites with excellent high-frequency properties

Interfacial Reaction Enhanced Liquid‐Phase Sintering of Metal/Oxide Soft Magnetic Composite