Abstract:Ceramic oxides are extensively utilized in soft magnetic composites (SMCs). However, further optimization is required to enhance their adaptability to the increasingly complex operational environments. This study investigated the applicability of a calcium–silicate–hydrate (CSH), prepared through the reaction between SiO2 and Ca(OH)2, as an insulation layer in SMCs. The process began with the deposition of SiO2 on FeSi soft magnetic powder using fluidized in situ chemical vapor deposition, followed by the introduction of Ca(OH)2 to produce the FeSi/CSH SMCs. The mechanism behind the formation of the composite insulation layer was examined in depth. Furthermore, the effect of Ca(OH)2 addition on the electro-magnetic characteristics of the prepared SMCs was examined. It was observed that in a relatively weakly alkaline reaction system, the interaction between SiO2 and Ca(OH)2 tends to form an amorphous CSH insulation layer with short-range order but without long-range order. As the contents of Ca(OH)2 rises, so does the alkalinity, resulting in a crystalline CSH layer. However, excessive Ca(OH)2 can cause agglomeration on the FeSi powder surface. Increasing the contents of Ca(OH)2 from 0.5 to 2.5 wt% resulted in a reduction in both saturation magnetization and permeability of the FeSi/CSH SMCs, whereas the resistivity increased. The total core loss initially increased but decreased afterward. The FeSi/CSH SMCs prepared with 1 wt% Ca(OH)2 exhibited the best overall magnetic properties. Under the 30 mT and 500 kHz, these SMCs stably maintained an effective permeability (μe) of 46.15, while the total core loss (Ptotal) was only 649.9 kW/m3. The saturation magnetization reached 183.1 emu/g, and the resistivity was 5.786 kΩ·cm. These findings demonstrate that this method for constructing the insulation layer successfully produces FeSi-based SMCs with both high permeability and low total core loss. This method shows significant potential in the field of energy storage and paves the way for the development of high frequency SMCs.

Fabrication and growth mechanism of iron oxide insulation matrix for Fe soft magnetic composites with high permeability and low core loss

Enhanced magnetic properties of Fe soft magnetic composites by surface oxidation

Two Growth Mechanisms in One-Step Fabrication of the Oxide Matrix for FeSiAl Soft Magnetic Composites

Fe-Based Soft Magnetic Composites with High B-S and Low Core Loss by Acidic Bluing Coating

High-performance Fe–Si soft magnetic composites with controllable silicate/nano-Fe composite coating

Fe@SiO2@(MnZn)Fe2O4 Soft Magnetic Composites with Enhanced Permeability and Low Core Loss for High-Frequency Applications

Formation mechanism and magnetic performance of Fe-Si soft magnetic composites coated with MnO-SiO2 composite coatings

Evolution of the Insulation Matrix and Influences on the Magnetic Performance of Fe Soft Magnetic Composites During Annealing

Enhanced Magnetic Properties and Thermal Conductivity of FeSiCr Soft Magnetic Composite with Al<sub>2</sub>O<sub>3</sub> Insulation Layer Prepared by Sol-Gel Process

Structural Evolution Mechanism and Magnetic Properties of Soft Magnetic Composites Transformed from Fesial/Co3o4 Composites

Fe-based Soft Magnetic Composites with High Permeability and Low Core Loss by in Situ Coating ZnFe 2 O 4 Layer

Highly enhancing electromagnetic properties in Fe-Si/MnO-SiO2 soft magnetic composites by improving coating uniformity

Preparation and magnetic performance optimization of FeSiAl/Al2O3–MnO–Al2O3 soft magnetic composites with particle size adjustment

High permeability and low core loss Fe-based soft magnetic composites with Co-Ba composite ferrite insulation layer obtained by sol-gel method

Development and Characterization of FeSi Soft Magnetic Composites with Calcium–Silicate–Hydrate Insulation Layers for Enhanced Magnetic Properties

Insulation Coating via Hydrothermal Oxidation for High-Frequency FeSiAl Soft Magnetic Composites

Formation Mechanism And Enhanced Magnetic Properties Of Fe-Si/Fe2sio4 Soft Magnetic Composites Transformed From Fe-6.5 Wt%Si/Alpha-Fe2o3 Core-Shell Composites

Microstructure and magnetic properties of the FeSiAl soft magnetic composite with a NiFe2O4-doped phosphate insulation coating

High performance of Fe-based soft magnetic composites coated with novel nano-CaCO3/epoxy nanocomposites insulating layer

Synthesis of well-insulated Fe–Si–Al soft magnetic composites via a silane-assisted organic/inorganic composite coating route

Soft magnetic composites with improved heat resistance and mechanical strength realized using Fe@SiO2 powders with a variable thickness insulation layer