Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Comparison of surface layers responses under heavy truck loadings on new and rehabilitated pavement with different interface bond conditions

Analysis of the Fatigue Crack Propagation Process of the Stress-Absorption Layer of Composite Pavement Based on Reliability

Evaluation of Flexible Pavement Deterioration Conditions Using Deflection Profiles under Moving Loads

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Influence of bonding condition of different interfaces on the mechanical responses and failure mode of asphalt pavement

Mechanistic investigation of grid-reinforced asphalt pavements with measured interface properties

Continuous strain monitoring of an instrumented pavement section

Influence of Horizontal Loads on Composite Pavement Overlay

Dynamic Response of Pavement Subjected to Moving Traffic Load

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Finite-Element Simulation of Instrumented Asphalt Pavement Response under Moving Vehicular Load

Viscoroute 2.0: a tool for the simulation of moving load effects on asphalt pavement

Effect of Bond Condition on Flexible Pavement Performance

Test and Evaluation Method of lnterlaminar Shear Performance of Composite Pavement

Influence of bonding conditions on flexible base asphalt pavement under non-uniform vertical loads

Longitudinal strain analysis in asphalt pavement under full-scale moving loads

Behaviours of geosynthetic-reinforced asphalt pavements investigated by laboratory physical model tests on a pavement structure

Cracking Propagation of Asphalt Pavement of Stabilized Base with Inorganic Binder under Coupling of Overloaded Traffic and Temperature