Abstract:With the development of accelerator technology, the scale of accelerators is becoming larger, ranging from hundreds of meters to several kilometers. For stable operation of accelerators, high-precision alignment, positioning, and installation are crucial. Installing all equipment inside the tunnel poses safety risks as personnel would be in a closed environment with potential radiation exposure for prolonged periods. To address the challenges of long adjustment and maintenance periods inside the tunnel due to the installation of equipment for large-scale accelerators, most accelerator devices under construction or in research have pre-alignment assemblies. Each assembly consists of a certain number of magnets distributed on girders. The magnets in one cell are pre-aligned with high precision in the laboratory and then transported to the tunnel. Aligning the entire magnet girder can significantly improve installation efficiency inside the tunnel. To meet the pre-alignment accuracy requirement of 10 micrometers in the horizontal and vertical directions for the magnet cells in the High Energy Photon Source (HEPS) storage ring, a system for high-precision pre-alignment of accelerator cells using four total stations for angle observation has been designed in this paper. By employing different instrument layout configurations and incorporating reliable distance benchmarks, high-precision pre-alignment of the magnet cells are achieved. By arranging targets and utilizing recognition for automatic targeting, real-time point calculations during pre-alignment enhance efficiency. Subsequently, based on this system, pre-alignment simulation calculations and experimental verification of eight magnet FODO(Focusing-Defocusing) cells in the HEPS storage ring are conducted and ultimately realizing the 10 μm transverse and vertical pre-alignment measuring error within the cells. This method, based on high-precision measurements in a small-scale space, reduces the period required for personnel on-site and improves pre-alignment efficiency. It also provides a reference for pre-alignment of multiple magnet cells in large accelerators such as the Southern Advanced Photon Source (SAPS) and Circular Electron Positron Collider (CEPC).

CEPC survey and alignment

High-precision laser alignment technique based on spiral phase plate

Configuration Analysis Of The Ers Points In Large-Volume Metrology System

Research on Auto-Centering Device in Surface Defects Evaluation System of Large Spherical Optics

Probe’s Auto-alignment in Curved Components Ultrasonic Survey

Methods for surveying and alignment of huge physics experiment facilities

Digital Combined Measuring Technology of Aircraft Large Components Outline

A Universal Precision Positioning Equipment in Coordinate Unified for Large Scale Metrology

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

A method for decreasing alignment error of coordinator measurement machine

Measurement Of Parallelism And Perpendicularity Of Large-Size Workpieces By Laser Alignment Method

A Combined Measurement Method for Large-Size Aerospace Components

Coordinate alignment of combined measurement systems using a modified common points method

An Automated In-Situ Alignment Approach for Finish Machining Assembly Interfaces of Large-Scale Components

Large survey camera collimation and alignment at the observation site by curvature sensing

3D Measurement of Large and Complex Parts Based on Phase Matching and Global Marker Points Registration

The Centering and Leveling Adjustment and Control Technology for the Ultra-Precision Turntable

Geodetic, survey and alignment challenges of the FCC-ee

Optimization Study of the Drift Field for TPC Detector in CEPC

Residual-based pattern center calibration in high-resolution electron backscatter diffraction

High-Precision Spatial Measurement Method of Accelerator Cell Pre-alignment Based on Multiple Total Stations