Abstract:The failure of composite laminates under cyclic fatigue loads is complex, as multiple failure mechanisms are in play at different scales and interact with each other. Predicting the remaining fatigue life as well as the residual capacities of a composite laminate or component is crucial, particularly for safety-critical applications. A progressive fatigue model is proposed to describe the catastrophic failure of open-hole laminates under tensile cyclic fatigue. To represent both intra-laminar and inter-laminar damage, a combination of a continuum damage mechanics model (CDM) and a discrete cohesive zone model (CZM) is implemented in the finite element (FE) software Abaqus. The CDM combines fibre- and matrix-dominated S-N curves with the Palmgren–Miner accumulation rule and Hashin’s residual strength to form a fatigue failure criterion differentiating between fibre failure (FF) and matrix failure (MF). The CZM implemented in this work is the CF20 model proposed by NASA. Fatigue cycling is simulated using an external cycle-jump scheme, where the stiffness degradation is conducted between the FE simulations outside of the implicit solver [90/0] s. Glass fibre reinforced polymer (GFRP) open-hole specimens were tested in tensile cyclic fatigue at a load ratio of 0.1. The experiments were reproduced numerically and the results compared. After calibration of a set of parameters based on one load level, the model was able to reproduce the experimental S-N curve very well, predicting a slope of −0.10, while the experimental value was −0.11. The failure sequence of the laminate was also successfully reproduced. The growth of the split from the hole, and its interaction with inter-laminar delamination, was successfully captured. The proposed approach was able to describe the fatigue failure of an open-hole laminate with a minimal set of material inputs using a simplified fatigue damage model while avoiding convergence issues.

An Experimental Study on the Fatigue Mechanism and Life Prediction of Glass Fiber Plates Under Random Vibrations

Progressive failure analysis of 2D woven composites at the meso-micro scale

High-cycle random vibration fatigue behavior of CFRP composite thin plates

Prediction Method of Fatigue Life and Preferment Fatigue Strength of WIG

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Numerical Simulation for Durability of a Viscoelastic Polymer Material Subjected to Variable Loadings Fatigue Based on Entropy Damage Criterion

Fatigue Tests of Single Layer and Laminated Glass Plates with Point Supports

Evaluation of fatigue damage of woven GFRP laminate by dynamic properties

Progressive damage modelling and fatigue life prediction of Plain-weave composite laminates with Low-velocity impact damage

Progressive Fatigue Modelling of Open-Hole Glass-Fibre Epoxy Laminates

Fatigue life prediction method for notched 3D woven composites based on progressive damage and field intensity

Micromechanical life prediction method of fiber-reinforced ceramic-matrix composites subjected to stochastic overloading at room temperature

Experimental research on flexural fatigue behavior of GFRP-Balsa sandwich beams

Modelling Fatigue Behaviours and Lifetimes of Novel GLARE Laminates under Random Loading Spectrum

A novel two-scale nonlinear damage accumulation model for vibration fatigue life prediction

Novel 2D strain-rate-dependent lamina-based and RVE/phase-based progressive fatigue damage criteria for randomly loaded multi-layer fiber-reinforced composites

Random vibration fatigue behavior of directionally solidified superalloy: Experiments and evaluation of life prediction methods

Fatigue life prediction method of carbon fiber-reinforced composites

A new time-frequency domain simulation method for damage accumulation and life prediction of composite thin-wall structures under random cyclic loadings

Vibration-based prediction of residual fatigue life for composite laminates through frequency measurements