Effects of Magnetic Intensity on the Machining Quality and Tool Damage in Nickel-based Superalloys Subjected to Magnetic-assisted Cutting
Chao Tang,Dong Zhang,Feng Wang,Fei Yin,Dongsheng Qian,Kejian Li,Zhipeng Cai,Tao Huang,Xiaoming Zhang,Jian Wang,Chang Ye,Han Ding
DOI: https://doi.org/10.1016/j.jmatprotec.2024.118494
IF: 6.3
2024-01-01
Journal of Materials Processing Technology
Abstract:Nickel-based superalloys are widely used in engine components due to their excellent high-temperature strength. However, their low plasticity and low thermal conductivity pose significant challenges in machining, leading to poor quality of machined parts and severe tool wear. Magnetic-assisted machining has received considerable attention as a clean and effective machining method, but its application to nickel-based superalloys is rarely reported, necessitating further exploration of its potential. This study focuses on GH4169 alloy and explores the effects of magnetic-assisted cutting (MAC) with varying intensities on the machining quality and tool wear. The experimental results indicate that the introduction of a magnetic field improves the machining quality by reducing tool wear and built-up edge adhesion. Additionally, both the plasticity and thermal conductivity of GH4169 alloy are improved under the effect of magnetic field, resulting in an 11.4 % decrease in cutting temperature. However, when the magnetic intensity ranges from 0.03 T to 0.12 T, secondary serration of the chip edges manifests, resulting in notch wear on the tool nose and a deterioration of surface quality. This secondary serration is attributed to the combined effect of tool nose radius and material plasticity under the magnetic field. As the magnetic field intensity increases further, the secondary serration gradually diminishes, and the surface roughness can be reduced by 26.5 % compared to traditional cutting. This study analyzed the relationship between machined surface, tool wear, chip morphology and magnetic field, and revealed the reasons for the differences in machining quality at different magnetic field intensities. These findings provide more possibilities for future applications of magnetic-assisted cutting to improve the machining quality of nickel-based superalloys and other difficult-to-machine metals.