Abstract:In this study, we examined the effect of calcination temperature on the structural, electrical transport and optical characteristics of Cd 0.3 Ni 0.2 Co 0.3 Cu 0.2 Fe 2 O 4 spinel ferrites. The samples, designated as S850 and S950, were prepared using sol-gel method, followed by calcination at 850 °C and 950 °C, respectively. The structural analysis for the samples S850 and S950 reveals its crystallization in the cubic spinel structure ( ). Subsequently, as the temperature of calcination increased there was an increasing trend observed in both the unit cell parameters and average crystallite size. In addition, we studied the optical properties of the samples. Using Tauc" s reflectance method, the optical band gap energy values ( E g ) were estimated. These analyses confirmed the direct optical transitions of the samples. Furthermore, the direct band-gap energies for S850 and S950 were found as E gd = 1.875 eV and E gd = 1.746 eV, respectively. Then, the calculated low Urbach energies ( E u = 1.05 eV for S850 and E u = 1.01 eV for S950) revealed the high quality of our samples. This observation implies that increasing the calcination temperature reduces the level of disorder and defects. The study also investigated the changes in optical constants, like the extinction coefficient and penetration depth, as a function of wavelength. The refractive index changes were used to determine the Cauchy parameters, while the Wemple-Didomenico equation was utilized to estimate the energy parameters related to dispersion. The research also focused on analyzing the optical dielectric and optical conductivity constants. Increased calcination temperature also decreases band-gap energy ( E g ) and activation energy ( E a ). Equivalent circuit modeling of Nyquist plots indicates that both grain and grain boundary contributions influence the conduction mechanism in the specimens. The Overlapping-Large Polaron Tunneling (OLPT) model was employed to elucidate the conduction mechanism observed in the specimens. Moreover, when subjected to high frequencies, the synthesized materials demonstrate reduced dielectric constants and minimal dielectric losses. Additionally, they exhibit heightened electrical resistivity under these conditions. These features make the Cd 0.3 Ni 0.2 Co 0.3 Cu 0.2 Fe 2 O 4 materials a potential choice for applications that require absorption of microwaves and high-frequency signals.

Preparation of infrared high radiation coatings from modified spinel NiFe2O4 and its energy saving applications

The Effect of Microstructure on the Middle and Short Waveband Emissivity of CuO-doped CuxCo1-xFe2O4 Spinel

Ferrites Based Infrared Radiation Coatings with High Emissivity and High Thermal Shock Resistance and Their Application on Energy-Saving Kettle

New spinel‐structured high‐entropy oxides with high‐ and stable‐infrared radiation properties

A Novel Optimization Model and Application of Optimal Formula Design for CuxCo1−xFe2O4 Spinel-Based Coating Slurry in Relation to Near and Middle Infrared Radiation Strengthening

Evolution of Structure and Infrared Radiation Properties for Ferrite-Based Amorphous Coating

Physical properties of Cd0.3Ni0.2Co0.3Cu0.2Fe2O4 spinel ferrites under different calcination temperatures

Enhanced near- and mid-infrared radiation property of MgCr2O4 by doping with Cu ions

Plasma Sprayed Ferrite-Based Infrared Radiation Coating Directly from Transition Metal Oxides Without High-Temperature Roasting

Novel Cu2+-Fe3+ co-doped LaAlO3 ceramic with high infrared radiation performance

Formation, thermal stability, and infrared radiation properties of spinel-structured high-entropy oxides in Co–Mn–Fe–Cr–Ni–Zn–O system

Extracting optical parameters of Cu-Mn-Fe spinel oxide nanoparticles for optimizing air-stable, high-efficiency solar selective coatings

Ca-Mn co-doping LaCrO3 coating with high emissivity and good mechanical property for enhancing high-temperature radiant heat dissipation

Influence of Calcination Temperature on Microstructure and Properties of (NiCuZn)Fe2O4 Ferrite Prepared via Ultrasonic-Assisted Co-Precipitation

Spherical Fe 3 O 4 morphology modulation for enhancing infrared emissivity and radiant heat dissipation

Effect of Ca2+/Cr3+doping ratio on the infrared radiation performance and Cr6+ formation in LaAlO3 ceramics

Infrared radiation properties of La3Ni2O7 and performance of the La3Ni2O7-based coating considering the effect of thermal reactivity

Ca2+‐Doped LaCrO3: A Novel Energy‐Saving Material with High Infrared Emissivity

High‐Entropy Engineering for Broadband Infrared Radiation

Design and competitive growth of different spinels at 750 °C for the multi-component CuCoMnFe alloy coatings

Spinel Cu-Mn-Cr Oxide Nanoparticle-Pigmented Solar Selective Coatings Maintaining >94% Efficiency at 750 degrees C