Ferrites Based Infrared Radiation Coatings with High Emissivity and High Thermal Shock Resistance and Their Application on Energy-Saving Kettle

Jianyi Zhang,Xi'an Fan,Lei Lu,Xiaoming Hu,Guangqiang Li
DOI: https://doi.org/10.1016/j.apsusc.2015.03.119
IF: 6.7
2015-01-01
Applied Surface Science
Abstract:Starting from Fe2O3, MnO2, Co2O3 and NiO powders, the ferrites based infrared radiation coatings with high emissivity and high thermal shock resistance were successfully prepared on the surface of carbon steel by high velocity oxy-fuel spraying (HVOF). The coating thickness was about 120-150 mu m and presented a typical flat lamellar structure. The coating surface was rough and some submicron grade grains distributed on it. The infrared emissivity of the ferrites based coating by HVOF was over 0.74 in 3-20 mu m wave band at 800 degrees C, which was obviously higher than that of the coating by brushing process in the short waveband. The bonding strength was 30.7 MPa between the coating and substrate, which was five times more than that of conventional coatings by brushing process. The combined effect of the superior bonding strength, typical lamellar structure, pre-existing microcracks and newly generated pores made the cycle times reach 27 when the coating samples were quenched from 1000 degrees C using water. Lastly, the infrared radiation coatings were applied on the underside of household kettle, and the energy-saving efficiency could reach 30.5%. The ferrites based infrared radiation coatings obtained in this work are good candidates for saving energy in the field of cookware and industrial high temperature furnace. (C) 2015 Elsevier B.V. All rights reserved.
What problem does this paper attempt to address?