Abstract:Absorbing materials have gained great applications for the capability of electromagnetic (EM) reflection reduction. So far, it is still very challenging to simultaneously achieve high-temperature resistance and broad working band in one design. This work reports a composite coating to realize this goal by using refractory Al2O3 coating and high-temperature conductive FeCrAl by atmospheric plasma spraying (APS). The reflection reduction mechanism is the phase cancellation instead of absorption. By spraying the FeCrAl structure on the surface of Al2O3 coating, it can behave as resonators to produce a phase difference. Here, with a thin thickness of 1.7 mm, the composite coating shows stable wideband EM reflection reduction from room temperature up to 700 °C, which originates from the excellent conductivity of FeCrAl and the steady dielectric property of Al2O3. In addition, a protective layer is employed to isolate the contact between the structural layer and the outside high-temperature environment, which prevents the conductive structure from corrosion and greatly enhances the practicability and feasibility for daily maintaining. Sample characterizations show that these layers are prepared of low porosity and closely bonded to form the composite coating. The EDX mapping scan results and microstructure analysis demonstrate that the composite coating can exhibit excellent stability at high temperatures. Meanwhile, XRD results at different temperatures indicate the phase structure of Al2O3 coating is not damaged. This study provides a route to achieve temperature insensitive EM reflection reduction over a wide frequency range and enlighten a promising future of this material system.

Plasma Sprayed Ferrite-Based Infrared Radiation Coating Directly from Transition Metal Oxides Without High-Temperature Roasting

Evolution of Structure and Infrared Radiation Properties for Ferrite-Based Amorphous Coating

Ferrites Based Infrared Radiation Coatings with High Emissivity and High Thermal Shock Resistance and Their Application on Energy-Saving Kettle

Thermal Radiative Properties of Plasma Sprayed Thermochromic Coating

Preparation of infrared high radiation coatings from modified spinel NiFe2O4 and its energy saving applications

Compatibility of low thermal conductivity and high infrared emissivity of plasma-sprayed Sm2Hf2O7 and Pr2Hf2O7 coatings

Infrared radiation and thermal cyclic performance of a high-entropy rare-earth hexaaluminate coating prepared by atmospheric plasma spraying

Oxidation Control of Atmospheric Plasma Sprayed FeAl Intermetallic Coatings Using Dry-Ice Blasting

Ca-Mn co-doping LaCrO3 coating with high emissivity and good mechanical property for enhancing high-temperature radiant heat dissipation

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Achieving high temperature broadband electromagnetic reflection reduction via Al2O3 / FeCrAl refractory composite coating

Mierostrueture and Performance of Plasma Sprayed Nano Zireonia Coating

The design and calculation of the infrared properties for low emissivity coatings dependent on the structure and distribution of flake Al pigments

Fabrication of a Novel MgO-B2O3-SiO2-Zn Coating by Thermal Spraying

Process—structure—property relationship for plasma-sprayed iron-based amorphous/crystalline composite coatings

Novel Strategy for Developing Bulk-Like Dense Metallic Coatings by Plasma Spraying

Feasibility research of perovskite‐type PrAlO3+δ as high‐temperature infrared radiation coating

Interfacial Structure and Physical Properties of High-Entropy Oxide Coatings Prepared via Atmospheric Plasma Spraying

Influence of Plasma Spraying Parameter on Microstructure and Photocatalytic Properties of Nanostructured TiO2–Fe3O4 Coating

Investigation of oxide scale formation and internal oxidation of an Fe-based coating at 500 °C and 600 °C

Thermal stability and sputtering resistance under irradiation of yttria dispersed ferrum films