Abstract:Abstract Pressure measurement from permanent downhole gauges (PDHGs) during extended shut-ins is a key piece of information that is often used for model calibration and reserve estimate in deep-water gas reservoirs. A key challenge in practical operation has been the failure of permanent downhole gauges (PDHGs) within the first few years of operation. To overcome this challenge, innovative modeling solutions have been developed to enable accurate bottom-hole well pressures to be calculated. Both the physics-based model and machine learning model are developed to predict PDHG pressure and temperature measurement from the wellhead and other measurements during well shut-in events. These models are calibrated and blind-tested with data collected while the PDHG is still functioning. The key to the physics-based model is our model of the gas temperature profile within the wellbore and cool-down rate on shut-in, which has been inspired and validated by independent OLGA transient well simulations. In addition to physics-based models, machine learning (ML) models have also been developed, which directly perform regression on available data. The physics-based model is shown to be able to predict PDHG pressure and temperature accurately by capturing two key physics. Firstly, on well shut-in, a significant gas density gradient develops, as the wellhead (usually on the ocean floor) cools rapidly, while the bottom-hole temperature remains high. This changing temperature profile along the wellbore path has been accurately captured by a data-driven temperature model in the physics-based model. In addition, the decline of temperature along the wellbore has been observed to depend on the well's production history. With higher/longer production of hot gas through the wellbore and additional heating of wellbore surrounds, a slower cool-down rate is observed. A data-driven decline-curve model is devised within the physics-based model and has been shown to successfully capture this dependency. Compared to the physics-based model, the machine learning model is much simpler to devised. It also has the flexibility to incorporate new input features other than those that we can physically interpret. Multiple ML models are tested, and the random forest has shown the best performance. The accuracy of the ML model is comparable to that of the physics-based one. In this work, novel physics-based models and ML models are presented and compared for estimating PDHG measurement from wellhead measurements. The build-up pressures from PDHG during well shut-ins are the principal input for reservoir surveillance, analysis, and optimization (SA&O) activities, including material balance estimates of gas-in-place and reservoir simulation history matching.

Enhancing pressure gradient prediction in multi-phase flow through diverse well geometries of North American shale gas fields using deep learning

Application of Machine Learning Method of Data-Driven Deep Learning Model to Predict Well Production Rate in the Shale Gas Reservoirs

Downhole Pressure Prediction for Deep Water Gas Reservoirs Using Physics-Based and Machine Learning Models

Dynamic Pressure Analysis of Shale Gas Wells Considering Three-Dimensional Distribution and Properties of the Hydraulic Fracture Network

Simulating Multiphase Flow in Reservoirs with Generative Deep Learning

Pressure Transient Analysis in Shale Wells with Heterogeneous Fractures by Using a Deep Learning Based Surrogate Model

Adaptive anomaly detection-based liquid loading prediction in shale gas wells

Deep Learning and Data Assimilation for Real-Time Production Prediction in Natural Gas Wells

Gas well performance prediction using deep learning jointly driven by decline curve analysis model and production data

Simulating Oil and Water Production in Reservoirs with Generative Deep Learning

Predicting gas flow rate in fractured shale reservoirs using discrete fracture model and GA-BP neural network method

A Novel Shale Gas Production Prediction Model Based on Machine Learning and Its Application in Optimization of Multistage Fractured Horizontal Wells

Optimization of tight gas reservoir fracturing parameters via gradient boosting regression modeling

Prediction performance advantages of deep machine learning algorithms for two-phase flow rates through wellhead chokes

Development of Machine Learning-Based Production Forecasting for Offshore Gas Fields Using a Dynamic Material Balance Equation

A deep-learning-based prediction method of the estimated ultimate recovery (EUR) of shale gas wells

A Robust Deep Learning Workflow to Predict Multiphase Flow Behavior during Geological CO2 Sequestration Injection and Post-Injection Periods

Transient pressure prediction in large-scale underground natural gas storage: A deep learning approach and case study

Multi-parameter modeling for prediction of gas–water production in tight sandstone reservoirs

An adaptive physics-informed deep learning method for pore pressure prediction using seismic data

Prediction of Shale-Gas Production at Duvernay Formation Using Deep-Learning Algorithm