Abstract:Abstract Pressure measurement from permanent downhole gauges (PDHGs) during extended shut-ins is a key piece of information that is often used for model calibration and reserve estimate in deep-water gas reservoirs. A key challenge in practical operation has been the failure of permanent downhole gauges (PDHGs) within the first few years of operation. To overcome this challenge, innovative modeling solutions have been developed to enable accurate bottom-hole well pressures to be calculated. Both the physics-based model and machine learning model are developed to predict PDHG pressure and temperature measurement from the wellhead and other measurements during well shut-in events. These models are calibrated and blind-tested with data collected while the PDHG is still functioning. The key to the physics-based model is our model of the gas temperature profile within the wellbore and cool-down rate on shut-in, which has been inspired and validated by independent OLGA transient well simulations. In addition to physics-based models, machine learning (ML) models have also been developed, which directly perform regression on available data. The physics-based model is shown to be able to predict PDHG pressure and temperature accurately by capturing two key physics. Firstly, on well shut-in, a significant gas density gradient develops, as the wellhead (usually on the ocean floor) cools rapidly, while the bottom-hole temperature remains high. This changing temperature profile along the wellbore path has been accurately captured by a data-driven temperature model in the physics-based model. In addition, the decline of temperature along the wellbore has been observed to depend on the well's production history. With higher/longer production of hot gas through the wellbore and additional heating of wellbore surrounds, a slower cool-down rate is observed. A data-driven decline-curve model is devised within the physics-based model and has been shown to successfully capture this dependency. Compared to the physics-based model, the machine learning model is much simpler to devised. It also has the flexibility to incorporate new input features other than those that we can physically interpret. Multiple ML models are tested, and the random forest has shown the best performance. The accuracy of the ML model is comparable to that of the physics-based one. In this work, novel physics-based models and ML models are presented and compared for estimating PDHG measurement from wellhead measurements. The build-up pressures from PDHG during well shut-ins are the principal input for reservoir surveillance, analysis, and optimization (SA&O) activities, including material balance estimates of gas-in-place and reservoir simulation history matching.

An adaptive physics-informed deep learning method for pore pressure prediction using seismic data

Deep Learning-Based Prediction of Subsurface Oil Reservoir Pressure Using Spatio-Temporal Data

Enhancing Pore Pressure Prediction Accuracy: A Knowledge-Driven Approach with Temporal Fusion Transformer

Estimating Pore Pressure in Tight Sandstone Gas Reservoirs: A Comprehensive Approach Integrating Rock Physics Models and Deep Neural Networks

Formation Pressure Prediction Method Based on Machine Learning

Real-Time Prediction of Formation Pore Pressure Using Hybrid LSTM-BP Model

A new pore pressure prediction method-back propagation artificial neural network

A Deep Learning Approach for Abnormal Pore Pressure Prediction Based on Multivariate Time Series of Kick

Deep learning for predicting porosity in ultra-deep fractured vuggy reservoirs from the Shunbei oilfield in Tarim Basin, China

Simultaneous prediction of multiple physical parameters using gated recurrent neural network: Porosity, water saturation, shale content

A Robust Deep Learning Workflow to Predict Multiphase Flow Behavior during Geological CO2 Sequestration Injection and Post-Injection Periods

Residual-Enhanced Physics-Guided Machine Learning With Hard Constraints for Subsurface Flow in Reservoir Engineering

Downhole Pressure Prediction for Deep Water Gas Reservoirs Using Physics-Based and Machine Learning Models

Probabilistic Prediction Method of Formation Pore Pressure

A Deep Learning Framework for Petrophysical Properties Prediction in Gas Reservoirs

Shale Pore Pressure Seismic Prediction Based on the Hydrogen Generation and Compaction-Based Rock Physics Model and Bayesian Hamiltonian Monte Carlo Inversion Method

High-Fidelity Permeability and Porosity Prediction Using Deep Learning With the Self-Attention Mechanism

A Physics-Constrained Data-Driven Workflow for Predicting Bottom Hole Pressure Using a Hybrid Model of Artificial Neural Network and Particle Swarm Optimization

Deep-learning-based proxy model for forecasting gas flooding performance of fractured well pattern in tight oil reservoirs

An integrated fracture parameter prediction and characterization method in deeply-buried carbonate reservoirs based on deep neural network

Analysis on Prediction Methods for Formation Pore Pressure under Multiple Pressure Formation Mechanisms