Abstract:Abstract Pressure measurement from permanent downhole gauges (PDHGs) during extended shut-ins is a key piece of information that is often used for model calibration and reserve estimate in deep-water gas reservoirs. A key challenge in practical operation has been the failure of permanent downhole gauges (PDHGs) within the first few years of operation. To overcome this challenge, innovative modeling solutions have been developed to enable accurate bottom-hole well pressures to be calculated. Both the physics-based model and machine learning model are developed to predict PDHG pressure and temperature measurement from the wellhead and other measurements during well shut-in events. These models are calibrated and blind-tested with data collected while the PDHG is still functioning. The key to the physics-based model is our model of the gas temperature profile within the wellbore and cool-down rate on shut-in, which has been inspired and validated by independent OLGA transient well simulations. In addition to physics-based models, machine learning (ML) models have also been developed, which directly perform regression on available data. The physics-based model is shown to be able to predict PDHG pressure and temperature accurately by capturing two key physics. Firstly, on well shut-in, a significant gas density gradient develops, as the wellhead (usually on the ocean floor) cools rapidly, while the bottom-hole temperature remains high. This changing temperature profile along the wellbore path has been accurately captured by a data-driven temperature model in the physics-based model. In addition, the decline of temperature along the wellbore has been observed to depend on the well's production history. With higher/longer production of hot gas through the wellbore and additional heating of wellbore surrounds, a slower cool-down rate is observed. A data-driven decline-curve model is devised within the physics-based model and has been shown to successfully capture this dependency. Compared to the physics-based model, the machine learning model is much simpler to devised. It also has the flexibility to incorporate new input features other than those that we can physically interpret. Multiple ML models are tested, and the random forest has shown the best performance. The accuracy of the ML model is comparable to that of the physics-based one. In this work, novel physics-based models and ML models are presented and compared for estimating PDHG measurement from wellhead measurements. The build-up pressures from PDHG during well shut-ins are the principal input for reservoir surveillance, analysis, and optimization (SA&O) activities, including material balance estimates of gas-in-place and reservoir simulation history matching.

A Prediction Model for Pressure and Temperature in Geothermal Drilling Based on Physics-Informed Neural Networks

Modeling unobserved geothermal structures using a physics-informed neural network with transfer learning of prior knowledge

Physics-informed Deep Learning Method for Predicting Tunnelling-Induced Ground Deformations

An adaptive physics-informed deep learning method for pore pressure prediction using seismic data

Temperature Prediction of Geothermal Drilling Considering the Drilling Fluid Thermophysical Parameters

Advancing Fractured Geothermal System Modeling with Artificial Neural Network and Bidirectional Gated Recurrent Unit

Physics-informed neural network-based petroleum reservoir simulation with sparse data using domain decomposition

Investigating Steady Unconfined Groundwater Flow using Physics Informed Neural Networks

A fast general thermal simulation model based on Multi-Branch Physics-Informed deep operator neural network

Physics-informed neural networks for hydraulic transient analysis in pipeline systems

A Novel Geothermal Wellbore Model Based on the Drift-Flux Approach

Prediction of hydraulic fracture initiation pressure in a borehole based on a neural network model considering plastic critical distance

Downhole Pressure Prediction for Deep Water Gas Reservoirs Using Physics-Based and Machine Learning Models

Physics-Informed Neural Network for the Transient Diffusivity Equation in Reservoir Engineering

Artificial Neural Network Prediction of Wellbore Stability in Offshore Shallow Formations

Physics-Informed Neural Networks with Skip Connections for Modeling and Control of Gas-Lifted Oil Wells

CPINNs: A coupled physics-informed neural networks for the closed-loop geothermal system

Deep Temperature-Field Prediction Utilizing the Temperature–Pressure-Coupled Resistivity Model: A Case Study in the Xiong’an New Area, China

A novel governing equation for shale gas production prediction via physics-informed neural networks

Using one-dimensional convolutional neural networks and data augmentation to predict thermal production in geothermal fields

A prediction model of wellbore temperature and pressure distribution in hydrocarbon gas injection well