Abstract:Abstract Pressure measurement from permanent downhole gauges (PDHGs) during extended shut-ins is a key piece of information that is often used for model calibration and reserve estimate in deep-water gas reservoirs. A key challenge in practical operation has been the failure of permanent downhole gauges (PDHGs) within the first few years of operation. To overcome this challenge, innovative modeling solutions have been developed to enable accurate bottom-hole well pressures to be calculated. Both the physics-based model and machine learning model are developed to predict PDHG pressure and temperature measurement from the wellhead and other measurements during well shut-in events. These models are calibrated and blind-tested with data collected while the PDHG is still functioning. The key to the physics-based model is our model of the gas temperature profile within the wellbore and cool-down rate on shut-in, which has been inspired and validated by independent OLGA transient well simulations. In addition to physics-based models, machine learning (ML) models have also been developed, which directly perform regression on available data. The physics-based model is shown to be able to predict PDHG pressure and temperature accurately by capturing two key physics. Firstly, on well shut-in, a significant gas density gradient develops, as the wellhead (usually on the ocean floor) cools rapidly, while the bottom-hole temperature remains high. This changing temperature profile along the wellbore path has been accurately captured by a data-driven temperature model in the physics-based model. In addition, the decline of temperature along the wellbore has been observed to depend on the well's production history. With higher/longer production of hot gas through the wellbore and additional heating of wellbore surrounds, a slower cool-down rate is observed. A data-driven decline-curve model is devised within the physics-based model and has been shown to successfully capture this dependency. Compared to the physics-based model, the machine learning model is much simpler to devised. It also has the flexibility to incorporate new input features other than those that we can physically interpret. Multiple ML models are tested, and the random forest has shown the best performance. The accuracy of the ML model is comparable to that of the physics-based one. In this work, novel physics-based models and ML models are presented and compared for estimating PDHG measurement from wellhead measurements. The build-up pressures from PDHG during well shut-ins are the principal input for reservoir surveillance, analysis, and optimization (SA&O) activities, including material balance estimates of gas-in-place and reservoir simulation history matching.

Transient pressure prediction in large-scale underground natural gas storage: A deep learning approach and case study

A Novel Performance Evaluation Method for Gas Reservoir-Type Underground Natural Gas Storage

A Robust Deep Learning Workflow to Predict Multiphase Flow Behavior during Geological CO2 Sequestration Injection and Post-Injection Periods

Downhole Pressure Prediction for Deep Water Gas Reservoirs Using Physics-Based and Machine Learning Models

Experiment and prediction for dynamic storage capacity of underground gas storage rebuilt from hydrocarbon reservoir

Reservoir multiparameter prediction method based on deep learning for CO2 geologic storage

Quantitative characterization of shale gas reservoir properties based on BiLSTM with attention mechanism

A Physics-Constrained Data-Driven Workflow for Predicting Coalbed Methane Well Production Using A Combined Gated Recurrent Unit and Multi-Layer Perception Neural Network Model

Enhancing pressure gradient prediction in multi-phase flow through diverse well geometries of North American shale gas fields using deep learning

Optimized long short-term memory (LSTM) network for performance prediction in unconventional reservoirs

Efficient prediction of hydrogen storage performance in depleted gas reservoirs using machine learning

Underground Gas Storage Process Optimization Using Integrated Subsurface Characterization, Dynamic Modeling and Monitoring - A Case Study

Real-time natural gas explosion modeling of offshore platforms by using deep learning probability approach

An enhanced prediction framework for coalbed methane production incorporating deep learning and transfer learning

Predicting the Gas Storage Capacity in Shale Formations Using the Extreme Gradient Boosting Decision Trees Method

Production Forecast of Deep-Coalbed-Methane Wells Based on Long Short-Term Memory and Bayesian Optimization

An adaptive physics-informed deep learning method for pore pressure prediction using seismic data

A Deep Learning Approach to Anomaly Detection in Geological Carbon Sequestration Sites Using Pressure Measurements

A deep-learning-based prediction method of the estimated ultimate recovery (EUR) of shale gas wells

Pressure Transient Analysis in Shale Wells with Heterogeneous Fractures by Using a Deep Learning Based Surrogate Model

Prediction of shale gas horizontal wells productivity after volume fracturing using machine learning – an LSTM approach