Abstract:Machine learning (ML) has become a robust method for modeling field operations based on measurements. For example, wellbore cleanout is a critical operation that needs to be optimized to enhance the removal of solids to reduce problems associated with poor hole cleaning. However, as wellbore geometry becomes more complicated, it gets more difficult to predict the cleaning performance of fluids. As a result, optimization is often challenging. Therefore, this study aims to develop a data-driven model for predicting hole cleaning in deviated wells to optimize drilling performance. More than 500 flow loop measurements from 8 studies are used to formulate a suitable ML model to forecast hole cleanout in directional wells. Measurements were obtained from hole-cleaning experiments that were conducted using different loop configurations. Test sections ranged in length from 22 to 100 feet, in hole diameter from 4 to 8 inches, and in pipe diameter from 2 to 4.5 inches. The experiments provided measured equilibrium bed height at a specific flow rate for various fluids, including water-based and oil-based fluids and fluids containing fibers. Several relevant test parameters, including fluid and cutting properties, well inclination, and drilling string rotation speed, were also considered in the analysis. The collected data has been analyzed using the Cross-Industry Standard Process for Data Mining (CRISP-DM). Six different machine learning techniques (Random Forest, Linear Regression, Neural Networks, Multivariate Adaptive Regression Spline, Support Vector Machine, and Boosted Decision Tree) have been evaluated to select the most appropriate method for predicting bed thickness in a wellbore. Also, we compared the predictions of the selected ML method with those of a mechanistic model for cases without drill string rotation. Finally, using the ML model, a parametric study has been conducted to investigate the impact of various parameters on the cleanout performance of selected fluids. Results show the relative influence of different variables on the prediction of cuttings bed. Accordingly, flow rate, drill string rotation, and fluid behavior index have a strong impact on dimensionless bed thickness, while other parameters such as fluid consistency index, solids density and diameter, fiber concentration, and well inclination angle have a moderate effect. The Boosted Decision Tree algorithm has provided the most accurate prediction with an R-square of approximately 90%, Root Mean Square Error (RMSE) of close to 0.07, and Mean Absolute Error (MAE) of roughly 0.05. A comparison between a mechanistic model and the selected ML technique shows that the ML model provided better predictions.

Prediction performance advantages of deep machine learning algorithms for two-phase flow rates through wellhead chokes

Modeling liquid rate through wellhead chokes using machine learning techniques

Comparative Performance of Machine-Learning and Deep-Learning Algorithms in Predicting Gas–Liquid Flow Regimes

Prediction of gas-liquid two-phase choke flow using Gaussian process regression

Enhancing pressure gradient prediction in multi-phase flow through diverse well geometries of North American shale gas fields using deep learning

Supervised Machine Learning Mode for Predicting Gas-Liquid Flow Patterns in Upward Inclined Pipe

Development of a Gas Flow Rate Model for Multi-Stage Choke System in HPHT Gas Wells Using Artificial Intelligence

Applications of Machine Learning Methods to Predict Hole Cleaning in Horizontal and Highly Deviated Wells

Machine Learning Models to Predict Bottom Hole Pressure in Multi‐phase Flow in Vertical Oil Production Wells

Real-Time Liquid Rate and Water Cut Prediction From the Electrical Submersible Pump Sensors Data Using Machine-Learning Algorithms

Prediction of Key Parameters in the Design of CO2 Miscible Injection via the Application of Machine Learning Algorithms

Accurate artificial intelligence-based methods in predicting bottom-hole pressure in multiphase flow wells, a comparison approach

Application of Machine Learning Method of Data-Driven Deep Learning Model to Predict Well Production Rate in the Shale Gas Reservoirs

CNN-Based Volume Flow Rate Prediction of Oil–Gas–Water Three-Phase Intermittent Flow from Multiple Sensors

Simulating Multiphase Flow in Reservoirs with Generative Deep Learning

Well Performance Classification and Prediction: Deep Learning and Machine Learning Long Term Regression Experiments on Oil, Gas, and Water Production

A Comparative Study of Oil–Water Two-Phase Flow Pattern Prediction Based on the GA-BP Neural Network and Random Forest Algorithm

Simulating Oil and Water Production in Reservoirs with Generative Deep Learning

A Comparison of Machine Learning Approaches for Prediction of Permeability using Well Log Data in the Hydrocarbon Reservoirs

A novel comprehensive model for predicting production of downhole choke wells

Decision Tree Regressions Estimate Liquid Holdup in Two-Phase Gas/Liquid Flows