Abstract:<p>Drilling rate of penetration (ROP) prediction is an enormously important step to optimize drilling controllable parameters. Therefore, numerous efforts have been done in order to present a more precise estimator model that is still ongoing. The results of the literature review indicated that, between the two approaches followed for ROP modeling, namely physic-based models and data-driven methods, the use of the data-driven methods has grown significantly. The literature review made two points clear: (1) the geomechanical parameters were not considered adequately, and (2) no previous research had applied a combination of least-squares support-vector machines (LSSVM) with cuckoo optimization algorithm (COA), particle swarm optimization (PSO), and genetic algorithms (GA). This led us to use hybrid algorithms for ROP modeling at vertical wells drilled in the southwestern Iran. For this purpose, mud logging parameters (including depth (Depth), mud density (MD), torque (Tor), standpipe pressure (SPP), equivalent circulating density (ECD), weight on bit (WOB), revolutions per minute (RPM), flow rate (FR), and ROP) and geomechanical parameters (including gamma ray (GR), porosity (NPHI), density (RHOB), and uniaxial compressive strength (UCS)) were collected along the studied wells. Histogram analysis and pairwise evaluation of the studied features indicated the presence of outliers among the data points. Accordingly, the Tukey's method was used to omit the outliers. Subsequently, the most relevant features in the ROP prediction were selected using a combination of the non-dominated sorting genetic algorithm II (NSGA-II) with multilayer perceptron (MLP) neural network. The results showed that one could attenuate the modeling error by increasing the number of input parameters into the ROP estimation model. However, the improvement was very subtle when the number of input parameters exceeded six. Therefore, six parameters (UCS, FR, WOB, Depth, MD, and RPM) were used for ROP modeling using LSSVM-COA, LSSVM-PSO, and LSSVM-GA hybrid algorithms. Results of applying these hybrid algorithms indicated that the LSSVM-COA outperformed the other two algorithms in terms of accuracy and the coefficient of determination. In a next step, the LSSVM-COA was trained on both the outlier-omitted and raw datasets, indicating the important role of the outlier omission step in achieving a highly accurate and reliable model. Continuing with the work, in order to evaluate the performance of the LSSVM-COA hybrid model, the model was compared to support-vector regression (SVR)-COA, MLP-COA, Motahhari's, linear multivariate regression (LMR), and nonlinear multivariate regression (NLMR) models. The results confirmed superior accuracy of the LSSVM-COA model over the examined models. The small difference between the obtained levels of error in the training and testing stages with the LSSVM-COA model, as compared to the other models, revealed that the model can be used to predict the ROP at other wells across the field reliably and accurately provided the model be developed with larger sets of data across the field. Predicting ROP with high accuracy at the test Well clearly proved this claim.</p>

Accurate artificial intelligence-based methods in predicting bottom-hole pressure in multiphase flow wells, a comparison approach

An Artificial Intelligence Prediction Method of Bottomhole Flowing Pressure for Gas Wells Based on Support Vector Machine

Using Artificial Intelligence to Predict IPR for Vertical Oil Well in Solution Gas Derive Reservoirs: A New Approach

Applied machine learning-based models for determining the magnitude of pore pressure and minimum horizontal stress

Flowing Bottomhole Pressure during Gas Lift in Unconventional Oil Wells

Application of soft computing approaches for modeling annular pressure loss of slim-hole wells in one of Iranian central oil fields

A Novel Correlation to Predict Gas Flow Rates Utilizing Artificial Intelligence: An Industrial 4.0 Approach

Prediction of Inflow Performance Relationship of a Gas Field Using Artificial Intelligence Techniques

Modeling liquid rate through wellhead chokes using machine learning techniques

Developing a new rigorous drilling rate prediction model using a machine learning technique

Intelligent Pressure Monitoring Method of BP Neural Network Optimized by Genetic Algorithm: A Case Study of X Well Area in Yinggehai Basin

Enhancing pressure gradient prediction in multi-phase flow through diverse well geometries of North American shale gas fields using deep learning

A Comparison of Machine Learning Approaches for Prediction of Permeability using Well Log Data in the Hydrocarbon Reservoirs

A New Empirical Correlation for Pore Pressure Prediction Based on Artificial Neural Networks Applied to a Real Case Study

Application of Data Analytic Techniques and Monte-Carlo Simulation for Forecasting and Optimizing Oil Production from Tight Reservoirs

A new method of predicting the saturation pressure of oil reservoir and its application

An artificial-intelligence-based petrophysical property predictor for compositional volatile oil reservoir using three-phase production data

Downhole Pressure Prediction for Deep Water Gas Reservoirs Using Physics-Based and Machine Learning Models

Predicting dynamic formation pressure using artificial intelligence methods

A New Model for Predicting Surface Pump Pressure of Drilling Rig Using Artificial Neural Network