Abstract:Anodizing is gaining popularity as a binder-free fabrication route for obtaining catalyst materials directly on the current collector without using noble metals, binders, or conductive carbon additives. Here, we fabricate promising highly active electrodes for alkaline water electrolysis by anodizing commercial FeNi and FeNiCo alloys (%wt. Fe range between 22 - 63) in an ethylene glycol-based fluoride electrolyte. Anodizing forms metal fluoride coatings, which are converted to OER active compounds (γ-NiOOH:Fe) during potential cycling in an alkaline aqueous solution (1 mol L −1 (M) KOH at 293 K) as a result of leaching of fluoride ions. The morphology, thickness, and number of active sites are influenced by the amount of Fe in the alloy, and the electrode with the highest electrochemical active surface area (Kovar alloy with a 54 %wt. Fe) shows the largest OER activity enhancement by anodizing. The performance evaluation in practical conditions (7 mol L −1 KOH at 343 K) demonstrated a highly active performance with an OER potential as low as 1.52 V at a current density of 600 mA cm −2 even for electrodes obtained in alloys with a low amount of Fe (78-Permalloy with a 22 %wt. Fe), demonstrating that anodizing is an effective way to develop highly active OER electrodes from commercially available alloys. On the other hand, anodizing is a good fluoridation route for transition metals with good results in the formation of F-enriched precursors that efficiently promote active phase formation during the catalytic process, offering the possibility of obtaining catalysts directly on the current collector in a one-step process, easily implemented in industrial applications.

Fabrication and characterization of anodic films onto the FeCrAl stainless steel in ethylene glycol electrolyte

Self-organised nanoporous anodic films on superaustenitic stainless steel

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Anodic behavior of Fe in acidic AlCl3-EMIC ionic liquid

Formation of Nanoporous Mixed Aluminum-Iron Oxides by Self-Organized Anodizing of FeAl3 Intermetallic Alloy

Anti-Corrosion Property of Atomic Layer Deposition Films for Anodized Aluminum

Fabrication and Application of Nano-Porous Aluminum

Influence of Electrolyte Temperature on Morphology and Properties of Composite Anodic Film on Titanium Alloy Ti-10V-2Fe-3Al

The role of electrolyte ratio in electrodeposition of nanoscale Fe Cr alloy from choline chloride-ethylene glycol ionic liquid: A suitable layer for corrosion resistance

Stainless steel-like FeCrNi nanostructures via electrodeposition into AAO templates using a mixed-solvent Cr(III)-based electrolyte

Electrochemical Fabrication Of Novel Nanostructures Based On Anodic Alumina

Peculiar Porous Aluminum Oxide Films Produced via Electrochemical Anodizing in Malonic Acid Solution with Arsenazo-I Additive

A Highly Controllable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membranes

Preparation of highly active and durable electrodes for alkaline water electrolysis by anodizing of commercial FeNi and FeNiCo alloys

Characterization of the Anodic Film and Corrosion Resistance of an A535 Aluminum Alloy after Intermetallics Removal by Different Etching Time

Selective etching-induced surface modifications of FeCrAl alloy bipolar plates: Mechanisms for enhanced corrosion resistance and hydrophobicity

Anodic Layer Growth on 1050 and 2024 Aluminium Alloys in Presence of Etidronic Acid : Changes in Morphology and Structure

Nanostructure Analysis of Anodic Films Formed on Aluminum-Focusing on the Effects of Electric Field Strength and Electrolyte Anions

Anodic characteristic during anodizing of electron-beam evaporation Aluminum film on Si substrate

CoCrFeMnNi High-Entropy Alloy Thin Films Electrodeposited on Aluminum Support

Structural and Hydrophilic Properties of Nanoporous Aluminium Oxide Film as a Function of Voltage Anodization