Abstract:Microbial electrolysis cells (MECs) have garnered significant attention as a promising solution for industrial wastewater treatment, enabling the simultaneous degradation of organic compounds and biohydrogen production. Developing efficient and cost-effective cathodes to drive the hydrogen evolution reaction is central to the success of MECs as a sustainable technology. While numerous lab-scale experiments have been conducted to investigate different cathode materials, the transition to pilot-scale applications remains limited, leaving the actual performance of these scaled-up cathodes largely unknown. In this study, nickel-foam and stainless-steel wool cathodes were employed as catalysts to critically assess hydrogen production in a 150 L MEC pilot plant treating sugar-based industrial wastewater. Continuous hydrogen production was achieved in the reactor for more than 80 days, with a maximum COD removal efficiency of 40 %. Nickel-foam cathodes significantly enhanced hydrogen production and energy efficiency at non-limiting substrate concentration, yielding the maximum hydrogen production ever reported at pilot-scale (19.07 ± 0.46 L H2 m-2 d-1 and 0.21 ± 0.01 m3 m-3 d-1). This is a 3.0-fold improve in hydrogen production compared to the previous stainless-steel wool cathode. On the other hand, the higher price of Ni-foam compared to stainless-steel should also be considered, which may constrain its use in real applications. By carefully analysing the energy balance of the system, this study demonstrates that MECs have the potential to be net energy producers, in addition to effectively oxidize organic matter in wastewater. While higher applied potentials led to increased energy requirements, they also resulted in enhanced hydrogen production. For our system, a conservative applied potential range from 0.9 to 1.0 V was found to be optimal. Finally, the microbial community established on the anode was found to be a syntrophic consortium of exoelectrogenic and fermentative bacteria, predominantly Geobacter and Bacteroides, which appeared to be well-suited to transform complex organic matter into hydrogen.

Asymmetric Neutral‐alkaline Microbial Electrolysis Cells for Hydrogen Production

In Situ Construction of Ni Enriched Porous NiAl As Long-Lived Electrode for Hydrogen Evolution at High Current Densities

N-doped macroporous carbon loading Mo2C as cathode electrocatalyst of hybrid neutral-alkaline microbial electrolysis cells for H2 generation

Platinum–Ruthenium Dual‐Atomic Sites Dispersed in Nanoporous Ni0.85Se Enabling Ampere‐Level Current Density Hydrogen Production

A New Cathodic Electrode Deposit with Palladium Nanoparticles for Cost-Effective Hydrogen Production in a Microbial Electrolysis Cell

Mesoporous RhTe Nanowires Towards All-Ph-value Hydrogen Evolution Electrocatalysis

Enhancing Hydrogen Production with Ni–P Coated Nickel Foam As Cathode Catalyst in Single Chamber Microbial Electrolysis Cells

Mo<sub>2</sub>N nanobelt cathodes for efficient hydrogen production in microbial electrolysis cells with shaped biofilm microbiome

Mo2N nanobelt cathodes for efficient hydrogen production in microbial electrolysis cells with shaped biofilm microbiome

Efficient H2 production in a ZnFe2O4/g-C3N4 photo-cathode single-chamber microbial electrolysis cell

Evaluation of Catalysts and Membranes for High Yield Biohydrogen Production Via Electrohydrogenesis in Microbial Electrolysis Cells (Mecs).

Defective Amorphous Carbon‐Coated Carbon Nanotube‐Loaded Ruthenium Nanoparticles As Efficient Electrocatalysts for Hydrogen Production

Investigation of hydrogen evolution on electrodeposited Ni/P coated carbon paper electrode in microbial fuel cell

Hydrogen Production Using Electrodeposited Ni and Ni/Co on Carbon Paper as Cathode Catalyst in Microbial Electrolysis Cells

Nanoporous Surface High‐Entropy Alloys as Highly Efficient Multisite Electrocatalysts for Nonacidic Hydrogen Evolution Reaction

H<sub>2</sub> Evolution Catalysts for Microbial Electrolysis Cells

Sponge-like Nickel Phosphide–carbon Nanotube Hybrid Electrodes for Efficient Hydrogen Evolution over a Wide Ph Range

Enhancing energy efficiency and H 2 production in lab-scale dual chamber microbial electrolysis cells: A focus on catholyte composition and voltage losses

A 3d Hybrid Of Layered Mos2/Nitrogen-Doped Graphene Nanosheet Aerogels: An Effective Catalyst For Hydrogen Evolution In Microbial Electrolysis Cells

Enhancing bioelectrochemical hydrogen production from industrial wastewater using Ni-foam cathodes in a microbial electrolysis cell pilot plant

Bold innovation of noble metal support system: Ru-RuO2/MXene@CC for efficient hydrogen evolution reaction in water electrolysis