Abstract:Microbial electrolysis cells (MECs) have garnered significant attention as a promising solution for industrial wastewater treatment, enabling the simultaneous degradation of organic compounds and biohydrogen production. Developing efficient and cost-effective cathodes to drive the hydrogen evolution reaction is central to the success of MECs as a sustainable technology. While numerous lab-scale experiments have been conducted to investigate different cathode materials, the transition to pilot-scale applications remains limited, leaving the actual performance of these scaled-up cathodes largely unknown. In this study, nickel-foam and stainless-steel wool cathodes were employed as catalysts to critically assess hydrogen production in a 150 L MEC pilot plant treating sugar-based industrial wastewater. Continuous hydrogen production was achieved in the reactor for more than 80 days, with a maximum COD removal efficiency of 40 %. Nickel-foam cathodes significantly enhanced hydrogen production and energy efficiency at non-limiting substrate concentration, yielding the maximum hydrogen production ever reported at pilot-scale (19.07 ± 0.46 L H2 m-2 d-1 and 0.21 ± 0.01 m3 m-3 d-1). This is a 3.0-fold improve in hydrogen production compared to the previous stainless-steel wool cathode. On the other hand, the higher price of Ni-foam compared to stainless-steel should also be considered, which may constrain its use in real applications. By carefully analysing the energy balance of the system, this study demonstrates that MECs have the potential to be net energy producers, in addition to effectively oxidize organic matter in wastewater. While higher applied potentials led to increased energy requirements, they also resulted in enhanced hydrogen production. For our system, a conservative applied potential range from 0.9 to 1.0 V was found to be optimal. Finally, the microbial community established on the anode was found to be a syntrophic consortium of exoelectrogenic and fermentative bacteria, predominantly Geobacter and Bacteroides, which appeared to be well-suited to transform complex organic matter into hydrogen.

Hydrogen Production Using Electrodeposited Ni and Ni/Co on Carbon Paper as Cathode Catalyst in Microbial Electrolysis Cells

Investigation of hydrogen evolution on electrodeposited Ni/P coated carbon paper electrode in microbial fuel cell

Enhancing Hydrogen Production with Ni–P Coated Nickel Foam As Cathode Catalyst in Single Chamber Microbial Electrolysis Cells

Efficient Hydrogen Recovery with CoP-NF As Cathode in Microbial Electrolysis Cells

A New Cathodic Electrode Deposit with Palladium Nanoparticles for Cost-Effective Hydrogen Production in a Microbial Electrolysis Cell

Electrodeposited Ni–Co–S Nanosheets on Nickel Foam As Bioelectrochemical Cathodes for Efficient H2 Evolution

Enhanced Hydrogen Production in Microbial Electrolysis Cell with 3D Self-Assembly Nickel Foam-Graphene Cathode

Cathodic Hydrogen Recovery and Methane Conversion Using Pt Coating 3D Nickel Foam Instead of Pt-carbon Cloth in Microbial Electrolysis Cells

Enhancing bioelectrochemical hydrogen production from industrial wastewater using Ni-foam cathodes in a microbial electrolysis cell pilot plant

Asymmetric Neutral‐alkaline Microbial Electrolysis Cells for Hydrogen Production

Mo<sub>2</sub>N nanobelt cathodes for efficient hydrogen production in microbial electrolysis cells with shaped biofilm microbiome

Scale-up of Co–Ni cathodes produced from spent Ni–Cd batteries for hydrogen production in an oxy-hydrogen gas cell

Ni5P4-NiP2 Nanosheet Matrix Enhances Electron-Transfer Kinetics for Hydrogen Recovery in Microbial Electrolysis Cells

Mo2N nanobelt cathodes for efficient hydrogen production in microbial electrolysis cells with shaped biofilm microbiome

Fabrication of Porous Ni-Co Catalytic Electrode with High Performance in Hydrogen Evolution Reaction

Sponge-like Nickel Phosphide–carbon Nanotube Hybrid Electrodes for Efficient Hydrogen Evolution over a Wide Ph Range

A 3d Hybrid Of Layered Mos2/Nitrogen-Doped Graphene Nanosheet Aerogels: An Effective Catalyst For Hydrogen Evolution In Microbial Electrolysis Cells

Nitrogen Doped Carbon Nanosheets Coupled Nickel–Carbon Pyramid Arrays Toward Efficient Evolution of Hydrogen

Impact of Current Collectors with Different Electrocatalytic Activities on Hydrogen Production in Microbial Electrolysis Cells with Flowable Cathodes

NiCoP self-supporting electrode with the sea urchin-like microstructure for the synchronous reaction of hydrogen evolution and contaminant degradation

Preparation of Ni nanocone/Grid electrodes by laser-electrodeposition combined process as an efficient and stable electrocatalyst for hydrogen evolution reaction