Abstract:Water electrolysis coupled to renewable energy sources has become in a crucial technique for the green hydrogen production. Hydrogen economy is currently in the spotlight to solve energy demands due to its advantages such as clean, sustainable, low footprint, as well as high-power density which is 3 times above gasoline and diesel. To produce large quantities of hydrogen, proton exchange membrane water electrolysis (PEMWE) has arisen as a promising system to solve hydrogen demands. The heart of the PEMWE consists in a membrane electrode assembly (MEA), where two gas diffusion layers (GDLs), hosting the respective catalysts, are sandwiched between an ionomer membrane. Commonly, noble metals are needed as catalyst in the anode (Ir, Ru) and cathode (Pt) to reach high current densities maintaining low cell voltages. The large content of noble metals, their high cost, and accelerated corrosion rates at high cell voltages are some drawbacks that limit the industrialization and commercialization of PEMWE technology. Replacing, decreasing, or simply extending the operational lifetime of these noble metals have a positive impact on the hydrogen economy. Molybdenum is an earth-abundant metal with low-cost which has been already used to produce highly active electrocatalysts, that can potentially replace Pt. However, most electrocatalytic studies are restricted to three-electrode cells with different operational conditions than those employed in PEM cells. The latter makes a complicated task to predict the performance of the catalyst and stability under relevant instrial applications. Here, we investigated the viability of using three selected Mo-based nanomaterials (1T’-MoS 2 , Co-MoS 2 , and ß-Mo 2 C) as potential electrocatalysts to replace Pt in PEMWE systems. We investigated the effects of replacing Pt in the catalyst loading, charge transfer resistance, kinetics, operational stability, and hydrogen production efficiency during PEMWE operation. Furthermore, we developed a methodology to identify the effects of tuning the cathode catalyst while keeping the anode catalyst in the overall kinetics of PEMWE system. Our results point that electrochemical performance in traditional open cell might not strictly predict the performance that could be seen in PEMWE cells due to differences in interfaces, contact between the components and porosity of the macroscopic catalyst layers. Among the catalyst studied, 1T’-MoS 2 exhibited low overpotential associated to low charge transfer resistance while reaching 1 A cm -2 at 1.9 V. Our study highlights the importance to continue developing efficient electrocatalysts to replace noble metals suitable for PEMWE systems. Figure 1

Mo<sub>2</sub>N nanobelt cathodes for efficient hydrogen production in microbial electrolysis cells with shaped biofilm microbiome

Mo2N nanobelt cathodes for efficient hydrogen production in microbial electrolysis cells with shaped biofilm microbiome

N-doped macroporous carbon loading Mo2C as cathode electrocatalyst of hybrid neutral-alkaline microbial electrolysis cells for H2 generation

A 3d Hybrid Of Layered Mos2/Nitrogen-Doped Graphene Nanosheet Aerogels: An Effective Catalyst For Hydrogen Evolution In Microbial Electrolysis Cells

A New Cathodic Electrode Deposit with Palladium Nanoparticles for Cost-Effective Hydrogen Production in a Microbial Electrolysis Cell

Asymmetric Neutral‐alkaline Microbial Electrolysis Cells for Hydrogen Production

Mo2C nanospheres anchored on nickel foam as self-supported electrode for high-performance hydrogen production

Using a non-precious metal catalyst for long-term enhancement of methane production in a zero-gap microbial electrosynthesis cell

Enhanced electrocatalytic hydrogen evolution by molybdenum disulfide nanodots anchored on MXene under alkaline conditions

Hydrogen Production Using Electrodeposited Ni and Ni/Co on Carbon Paper as Cathode Catalyst in Microbial Electrolysis Cells

Bimetallic hybrids modified with carbon nanotubes as cathode catalysts for microbial fuel cell: Effective oxygen reduction catalysis and inhibition of biofilm formation

Mo 2 N–Ni/NF Heterostructure Boosts Electrocatalytic Hydrogen Evolution with Pt-Like Activity

Investigating the Effects on Replacing Platinum by Molybdenum as Cathode Electrocatalysts in Proton Exchange Membrane Water Electrolysis

Molybdenum anode: a novel electrode for enhanced power generation in microbial fuel cells, identified via extensive screening of metal electrodes

Highly active and durable nanostructured molybdenum carbide electrocatalysts for hydrogen production

In-Situ and Controllable Construction of Mo 2 N Embedded Mo 2 C Nanobelts as Robust Electrocatalyst for Superior pH-Universal Hydrogen Evolution Reaction

Mo 2 C nanoparticles embedded within bacterial cellulose-derived 3D N-doped carbon nanofiber networks for efficient hydrogen evolution

Energy‐Saving Hydrogen Production from Methanol Electrocatalysis Catalyzed by Molybdenum Phosphide/Nitrogen‐Doped Carbon Polyhedrons Supported Pt Nanoparticles

Hydrothermal synthesis of Fe Mn bimetallic nanocatalysts as high-efficiency cathode catalysts for microbial fuel cells

Enhancing Hydrogen Production with Ni–P Coated Nickel Foam As Cathode Catalyst in Single Chamber Microbial Electrolysis Cells

Hierarchical Crystalline/Amorphous Heterostructure MoNi/NiMoOx for Electrochemical Hydrogen Evolution with Industry‐Level Activity and Stability