Abstract:Transparent CuJ copper iodide thin-film electrodes are widely used in various optoelectronic devices, such as solar cells, electroluminescent displays, touch screens, multifunctional photoconverters, etc. Their advantages are high transparency, because CuJ absorbs light in a limited range of wavelengths, which allows them to transmit visible light, making them ideal for transparent devices, low cost, because copper iodide is an inexpensive material, making it economically viable for mass production, simplicity fabrication, as CuJ can be easily deposited on various substrates using simple film deposition techniques such as vacuum deposition and magnetron sputtering. However, transparent CuJ type thin-film electrodes are subject to aging and degradation, which can reduce their performance and service life. The main factors affecting the aging and degradation of CuJ are the processes of oxidation, diffusion, degradation under the influence of light, and humidity. Despite numerous studies in the direction of obtaining high-quality thin films of copper iodide, today there is a need for a detailed study of the processes of their aging and degradation of properties. Therefore, in this article, we investigated the degradation processes of transparent upper copper iodide electrodes of thin-film multicomponent semiconductor heterostructures. This article shows the features of the use of film copper iodide in multilayer thin-film semiconductor structures. The influence of atmospheric conditions and lighting on the values of the rates of degradation of electrical resistance of copper iodide in semiconductor thin-film structures was studied. It has been found that atmospheric exposure to oxygen, moisture and other factors increases the electrical resistance of the copper iodide top electrode, and the use of Elastosil sealant does not lead to appreciable improvement. Heterostructures in vacuum are minimally affected by external factors, and therefore a significant increase in their CuJ upper electrode resistance values indicates the predominant role of aging of copper iodide films, which is not related to atmospheric conditions. It was established that natural sunlight significantly increases the degradation of copper iodide films, which should be taken into account when forming and using the corresponding thin film structures.

Aging tests of mini-modules with copper-plated heterojunction solar cells and pattern-transfer-printing of copper paste

Process challenges of high-performance silicon heterojunction solar cells with copper electrodes

Improvement of solder interconnections applied on back contact solar cells with low-temperature copper paste busbars

Copper metallization of electrodes for silicon heterojunction solar cells: Process, reliability and challenges

Evaluation of different approaches for HJT cells metallization based on low temperature copper paste

Measuring metal halide perovskite single cell degradation consistent with module-based conditions

Dispensing of low-temperature silver pastes

Non-Destructive Failure Detection and Visualization of Artificially and Naturally Aged PV Modules

Silicon Heterojunction and Half-Cell configuration: optimization path for increased module power

Copper-Plating Metallization With Alternative Seed Layers for c-Si Solar Cells Embedding Carrier-Selective Passivating Contacts

Fast screen printing and curing process for silicon heterojunction solar cells

Effect of Glass Phase on Solder Joint Reliability in Crystalline Silicon Photovoltaic Modules

Analysis of the Degradation of Monocrystalline Silicon Photovoltaic Modules After Long-Term Exposure for 18 Years in a Hot–Humid Climate in China

Life Prediction of Solder Interconnects under Harsh Thermal Cycling from Microstructural Degradation

Post-Separation Processing for Silicon Heterojunction Half Solar Cells With Passivated Edges

Copper–Nickel Alloy Plating to Improve the Contact Resistivity of Metal Grid on Silicon Heterojunction Solar Cells

Aging and degradation of transparent copper iodide thin film electrodes for functional electronic devices

Review of technology specific degradation in crystalline silicon, cadmium telluride, copper indium gallium selenide, dye sensitised, organic and perovskite solar cells in photovoltaic modules: Understanding how reliability improvements in mature technologies can enhance emerging technologies

Metallization optimization for high efficiency silicon heterojunction solar cells using low-temperature paste screen printing

Post‐Mortem Analysis of Building‐Integrated Flexible Thin Film Modules

Predicting the Lifetime of HJT Modules Towards the Outdoor Real-World Environment