Abstract:We have developed and successfully tested new environmental liquid cells for HAXPES studies using specially designed thin, low‐stress silicon nitride membranes (15 to 25 nm thickness). The novel aspect is the fabrication of the membranes considering the geometry of the experimental setup, the dimensions of the beam and the use of platinum stripes to efficiently localize the membranes. The membranes are robust, able to withstand the 1 bar pressure difference between the liquid and vacuum, and the intense beam.We present first hard X‐ray photoelectron spectroscopy (HAXPES) results of aqueous salt solutions and dispersions of gold nanoparticles in liquid cells equipped with specially designed microfabricated thin silicon nitride membranes, with thickness in the 15–25 nm range, mounted in a high‐vacuum‐compatible environment. The experiments have been performed at the HAXPES endstation of the GALAXIES beamline at the SOLEIL synchrotron radiation facility. The low‐stress membranes are fabricated from 100 mm silicon wafers using standard lithography techniques. Platinum alignment marks are added to the chips hosting the membranes to facilitate the positioning of the X‐ray beam on the membrane by detecting the corresponding photoemission lines. Two types of liquid cells have been used, a static one built on an Omicron‐type sample holder with the liquid confined in the cell container, and a circulating liquid cell, in which the liquid can flow in order to mitigate the effects due to beam damage. We demonstrate that the membranes are mechanically robust and able to withstand 1 bar pressure difference between the liquid inside the cell and vacuum, and the intense synchrotron radiation beam during data acquisition. This opens up new opportunities for spectroscopic studies of liquids.

In Situ Formation of Suspended Graphene Windows for Lab‐Based XPS in Liquid and Gas Environments

Electron transparent graphene windows for environmental scanning electron microscopy in liquids and dense gases

Ambient-Pressure X-ray Photoelectron Spectroscopy through Electron Transparent Graphene Membranes

Graphene Windows Enable Photoelectron Microscopies of Liquid Samples.

Performance Improvement of Graphenic Carbon X-ray Transmission Windows

Direct Growth of Graphene Films on 3d Grating Structural Quartz Substrates for High-Performance Pressure-Sensitive Sensors

2D Material Membranes for Operando Atmospheric Pressure Photoelectron Spectroscopy

Effect of Static Pressure on Ultrasonic Liquid Phase Exfoliation of Few-Layer Graphene

Dynamic imaging of Au-nanoparticles via scanning electron microscopy in a graphene wet cell

Probing the Electrical Double Layer by Operando X‐ray Photoelectron Spectroscopy Through a Graphene‐carbon Nanotube Composite Window

Enabling Photoemission Electron Microscopy In Liquids Via Graphene-Capped Microchannel Arrays

Design and properties of low energy x-ray transmission windows based on graphenic carbon

Direct observation of graphene growth and associated copper substrate dynamics by in situ scanning electron microscopy.

Large-Area and Clean Graphene Transfer on Gold-Nanopyramid-Structured Substrates: Implications for Surface-Enhanced Raman Scattering Detection

In vacuo X-ray data collection from graphene-wrapped protein crystals

High-Yield Large-Scale Suspended Graphene Membranes over Closed Cavities for Sensor Applications

Development of hard X‐ray photoelectron spectroscopy in liquid cells using optimized microfabricated silicon nitride membranes

New Setup For In Situ X-Ray Photoelectron Spectroscopy From Ultrahigh Vacuum To 1 Mbar

Improved graphene blisters by ultrahigh pressure sealing

Facile and Ultraclean Graphene-on-Glass Nanopores by Controlled Electrochemical Etching

In situ X-ray photoelectron spectroscopy of model catalysts: At the edge of the gap