Abstract:The adoption of microfluidic technologies in electrochemical biosensor development has enabled quantitative biomarker monitoring that use significantly lower volumes of reagents and samples, miniaturized electrodes, and inexpensive fabrication techniques, while presenting opportunities for multianalyte detection. We describe the fabrication of amperometric and potentiometric biosensors on a multichannel, platinum screen-printed electrode (SPE) and demonstrate their operation in parallel on a microfluidic multianalyte electrochemical sensor array (μMESA) platform. Working electrodes (WEs) of an SPE were were modified with either enzymes or ion selective membranes (ISMs) for amperometric or potentiometric measurements respectively. Oxidase enzymes were dissolved in an osmium (II) bis(2,2'-bipyridine)chloride-poly(vinylimidazole-allylamine) redox polymer and immobilized on four WEs. The use of this osmium-based electron transfer mediator has been previously reported to lower the oxidation potential of analytes and to improve overall sensor performance. The remaining four WEs were modified by electrodeposition of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), an intrinsically conductive polymer. Solid contact ISMs were prepared by combining ionophores, lipophilic ion exchangers, and a fluorosilicone polymer, and drop casting the mixtures on PEDOT:PSS-coated WEs. Plasticizer-free ISMs improve sensor lifetime by lowering the glass transition temperature and eliminating leaching of plasticizers from the ISM. By utilizing these strategies, we fabricated amperometric sensors for glucose and lactate, and potentiometric sensors for K + and Ca 2+ ions. Glucose is a primary substrate for energy metabolism while lactate is a major metabolite and signaling molecule. K + ions maintain cell membrane physiology and homeostasis whereas Ca 2+ ions serve as messengers during muscle activity and neurotransmission. Sensor characteristics like sensitivity, selectivity, linear range, and operational longevity for each biosensor were assessed using chronoamperometry or chronopotentiometry techniques on a potentiostat/potentiometer instrument. The results indicate that the sensor fabrication strategies described, in combination with our μMESA platform, can be used to measure changes in metabolite concentrations under laminar flow. Ultimately, this versatile technology may provide novel insights into complex physiological and pathological processes in biological systems.

Programmable Readout With Integrated Bandgap Reference Potentiostat for Glucose Sensing

Programmable Transimpedance Amplifier with Integrated Bandgap Reference for Glucose Concentration Measurement

An Enzyme-Metal-Insulator-Silicon Structured Sensor Using Surface Photovoltage Technology for Potentiometric Glucose Detection

Sensitive Electrochemical Sequential Enzyme Biosensor for Glucose and Starch Based on Glucoamylase- and Glucose Oxidase- Controllably Co-Displayed Yeast Recombinant

Glucose biosensor based on open-source wireless microfluidic potentiostat

Glucose sensing and hybrid instrumentation based on printed organic electrochemical transistors

In-Channel Modification of Biosensor Electrodes Integrated on A Polycarbonate Microfluidic Chip for Micro Flow-Injection Amperometric Determination of Glucose

A Low Power Potentiostat for Implantable Glucose Sensor Tag

Reliable Remote-Monitoring Electrochemical Potentiostat for Glucose Measurements

Single‐Component Electroactive Polymer Architectures for Non‐Enzymatic Glucose Sensing

Blending Enzyme Immobilization Enabled High Performance Glucose Sensor Based on an n-channel Organic Electrochemical Transistor

A Micro Glucose Sensor Based on Direct Prototyping Mesoporous Carbon Electrode

Miniaturized FDDA and CMOS Based Potentiostat for Bio-Applications

A Reliable, Practical and Cost-Effective Portable Wireless Potentiostat for Mobile Chemical Sensing and Biosensing

Parallel Amperometric and Potentiometric Multianalyte Detection in a Microfluidic System

A Wireless Potentiostat Exploiting PWM-DAC for Interfacing of Wearable Electrochemical Biosensors in Non-Invasive Monitoring of Glucose Level

Electrochemical Sensing of Glucose Using Glucose Oxidase/PEDOT:4-Sulfocalix [4]arene/MXene Composite Modified Electrode

Chronoampermetric detection of enzymatic glucose sensor based on doped polyindole/MWCNT composites modified onto screen-printed carbon electrode as portable sensing device for diabetes

Composite PEDOT-PSS based highly sensitive electrochemical sensors for sensing glucose from human saliva

A MEMS based blood glucose measurement sensor using twin-cantilever structure

Novel Approach for the Immobilization of Cellobiose Dehydrogenase in PEDOT:PSS Conductive Layer on Planar Gold Electrodes