Abstract:Organic photovoltaic solar cells can offer advantages of being mechanically flexible and durable, large area devices, lightweight, made from a diversity of materials and low-cost fabrication. Their efficiency is, however, still too low for commercial exploitation. Empirical observations reveal that polymer–fullerene (P3HT:PCBM) based solar cell performance depends on thermal annealing processes employed, especially the annealing temperatures and durations. The annealing parameters are known to influence the energetics and kinetics of the blending process or morphology, but the associated physics is not fully understood. In this work, current density–voltage characteristics of P3HT:PCBM bulk heterojunction organic solar cells, thermally annealed at different temperatures, 65–160 °C post fabrication, were investigated under dark and illuminated conditions, and compared to their as-cast counterparts. In certain electrical regimes, as-cast devices showed higher values of current density in comparison to the corresponding annealed devices. Such performance was attributed to air-borne chemical doping of the as-cast semiconductor layer, which creates electrically conductive percolation pathways within the as-cast devices. We propose that annealing of semiconductors must be a two-step process, which first initiates decrease in conductivity, followed by its increase. As-cast devices P3HT–PCBM bulk heterojunction solar cells prepared under atmospheric conditions were observed to have comparatively superior photovoltaic performance in comparison to thermally annealed devices. The efficiency drop in the annealed counterparts is attributed to dedoping due to thermal annealing. An annealing temperature of ~ 140 °C was found to be optimum for power conversion efficiency in the bulk heterojunction, 1:1 by mass, P3HT:PCBM based solar cells.

Insights into the Heat‐Assisted Intensive Light‐Soaking Effect on Silicon Heterojunction Solar Cells

Silicon Quantum Dot Based Solar Cells: Addressing the Issues of Doping, Voltage and Current Transport

Current Injection‐induced Performance Enhancement in n‐type Silicon Heterojunction Solar Cells

Influence of Light Soaking on Silicon Heterojunction Solar Cells With Various Architectures

Resistivity analysis on the enhancement of silicon heterojunction solar cells in light-thermal treatment

Reassessment of silicon heterojunction cell performance under operating conditions

Transferability of the light-soaking benefits on silicon heterojunction cells to modules

Enhancing the Selectivity and Transparency of the Electron Contact in Silicon Heterojunction Solar Cells by Phosphorus Catalytic Doping

Short wavelength photons destroying Si‐H bonds and its influence on high efficiency silicon solar cells and modules

The microstructure of underdense hydrogenated amorphous silicon and its application to silicon heterojunction solar cells

A study on the improvement of amorphous silicon/crystalline silicon heterojunction solar cells by microwave processing

Dark and illuminated J(V) characteristics of thin layered bulk heterojunction P3HT:PCBM sandwich solar cells after thermal treatment

Single‐Side Heterojunction Solar Cell with Microcrystalline Silicon Oxide Emitter and Diffused Back Surface Field

Intrinsic layer modification in silicon heterojunctions: Balancing transport and surface passivation

Light soaking-induced performance enhancement in a-Si:H/c-Si heterojunction solar cells

The effect of the curing process on illuminated annealing of silicon heterojunction solar cells

Influence of intrinsic amorphous silicon passivation layer on the dark-state stability of SHJ cells

Light-activated surface passivation for more efficient silicon heterojunction solar cells: Origin, physics and stability

Interdigitated back contact silicon heterojunction solar cell and the effect of front surface passivation

An insight into effect of front surface field on the performance of interdigitated back contact silicon heterojunction solar cells

Balance of efficiency and stability of silicon heterojunction solar cells