Abstract:Molten lead (Pb) and its alloys (PbBi and PbLi) are of immense interest for various nuclear engineering applications, including but not limited to advanced Lead-cooled Fast Reactors (LFRs), tritium Breeding Blankets (BBs) of fusion power plants and spallation targets for Accelerator-Driven Systems (ADS). Owing to their attractive thermophysical properties, these advanced fluids assert their candidacy to address the critical requirements of neutron multiplication, neutron moderation, high temperature coolants and tritium breeders, enabling the operation of next generation nuclear systems at high temperatures with better efficiencies. However, for numerous reasons such as a compromise of structural integrity at the heat transfer interface, presence of an inert cover gas during charging of molten metal in the loop, and the fusion fuel cycle itself may lead to molten metal-gas two-phase flows with high density ratios. At present, no effective diagnostics exist to detect such operational and accidental occurrences in high temperature molten metal systems resulting in a severe lack of relevant experimental studies. To address these limitations and to advance the current understanding toward two-phase regimes in high temperature Pb-based melts, the present work focuses on the design and assembly aspects of an electrical conductivity-based two-phase detection sensor array, utilizing high purity α-Al 2 O 4 coatings with AlPO 4 binder as electrical insulation layers. This paper discusses the design considerations, thermal analysis, systematic selection of structural/functional components along with preliminary results from the probe performance tests in very high temperature (600°C) static molten Pb column for real time detection of argon gas bubbles rising within the melt. Quantitative estimations of time-averaged void fraction, average bubble impaction frequency and average bubble residence time are presented from the preliminary experimental investigations.

Design Optimization and Measurement Uncertainty of an Electromagnetic Level Sensor for Liquid Metal Reactors

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

Design Of A Novel Hybrid Sensor With Microelectrode Array And Laps For Heavy Metal Determination Using Multivariate Nonlinear Calibration

Electromagnetic Field and Temperature Field Analysis of Coil Type Lead-Bismuth Electromagnetic Flowmeter

Development of a water level sensor using magnetostrictive materials

Numerical simulation for inductive level sensor with magnetic fluid

Numerical analysis and structural optimization of a DLC coated capacitance wire-mesh sensor for measuring liquid metal-gas two-phase distribution

Research on Nuclear Post-accident Liquid Level Detection Signal Deviation in Nuclear Power Plant Reactor Building

Calibration and Optimization of an Insertion Electromagnetic Flowmeter With the Aid of Numerical Analysis

Design, fabrication and validation of an electrical conductivity principle based two-phase detection sensor array for molten lead (Pb) based heavy metal coolants up to 600^∘C

The Design of Magnetostrictive Liquid Level Sensor Based on DSP

Capacitive and Non-Contact Liquid Level Detection Sensor Based on Interdigitated Electrodes with Flexible Substrate

Magnetoelastic Sensor Optimization for Improving Mass Monitoring

A Numerical Investigation of an Eddy Current Sensor for Detecting Small Defects in Metal Additive Manufacturing

A Simulation Model for the Inductor of Electromagnetic Levitation Melting and Its Validation

Additively Manufactured Flexible Liquid Metal–Coated Self‐Powered Magnetoelectric Sensors with High Design Freedom

Circuit Design and Performance Analysis of Magnetostrictive Liquid Level Sensor

Noninvasive Liquid Level Sensing with Laser Generated Ultrasonic Waves

Development of Diagnostics for High-Temperature High-Pressure Liquid Pb-16Li Applications

An AMC-Based Liquid Sensor Optimized by Particle-Ant Colony Optimization Algorithms

Molten Sodium Impurity Detection: Investigation of a Fiber-Optic Sensor as a Plugging Meter Alternative