Abstract:Next-generation nuclear power plays a large role in the world's efforts to meet critical climate goals. The sodium fast reactor concept forms the basis for TerraPower's recently launched Natrium TM Reactor Plant. Design of the new facility requires stringent stress analysis of all reactor parts, including confirming results for crucial components with experimentation. These experiments—along with general reactor operation—must accurately measure oxygen concentration in the sodium coolant due to related corrosion mechanisms. The current Reactor Development and Technology standard plugging meter methodology was developed in the 1970s, heavily relying on the operator's visual interpretation of data. This subjectivity prompted the development of a new objective measurement method, called the UW Minimum Method, and a proposed modification to the standard instrument geometry, which involved the reduction in the diameter of the flow orifices. Both revisions, presented in this study, were designed to improve measurement repeatability/accuracy in laboratory- and reactor-scale sodium systems. Sodium oxygen levels at four concentrations (2, 4, 8, and 10 wppm) were measured by both the modified and standard instruments using the Reactor Development and Technology standard procedure and the UW Minimum Method. Smaller orifice sizes performed similarly to larger orifices but produced more consistent measurements of oxygen concentration. The UW Minimum Method offered quicker, objective, and more repeatable measurements with similar accuracy but less uncertainty than the Reactor Development and Technology standard method. As the system was purified by cold trap and not in contact with water, it was assumed that hydrogen was not present in sufficient quantity to affect plugging meter measurements. Results for all experiments were compared against vanadium wire equilibration measurements. During this work, it was found that the Reactor Development and Technology standard for the vanadium wire equilibration technique also requires updating and an improved description.

Molten Sodium Impurity Detection: Investigation of a Fiber-Optic Sensor as a Plugging Meter Alternative

Coiled Optical Nanofiber for Optofluidic Absorbance Detection.

Analysis of plugging meter measurement techniques for oxygen concentration determination in liquid sodium

Oxygen Sensitive Polymeric Nanocapsules for Optical Dissolved Oxygen Sensors

Thermal Conductivity Measurement Using Modulated Photothermal Radiometry for Nitrate and Chloride Molten Salts

In-Situ Analysis of Corrosion Products in Molten Salt: X-ray Absorption Reveals Both Ionic and Metallic Species

Detection of Off-Gassed Products From Molten Salts Using Laser-Induced Breakdown Spectroscopy

Design and performance of a molten fluoride salt-compatible optical thermophysical property measurement system

Real-Time Elemental and Isotopic Measurements of Molten Salt Systems through Laser-Induced Breakdown Spectroscopy

Towards in-Situ Corrosion Measurements in Molten Fluoride Salt By Simultaneous X-Ray Absorption Spectroscopy and Electrochemistry

Fluorescent Probe-Based Fiber Optic Sensor for Real-Time Monitoring of Chloride Ions in Coastal Concrete Structures

Sodium-based no-core fiber surface plasmon resonance sensor with high sensitivity and narrow FWHM

A Novel Technique for Monitoring Carbonate and Scale Precipitation Using a Batch-Process-Based Hetero-Core Fiber Optic Sensor

Design Optimization and Measurement Uncertainty of an Electromagnetic Level Sensor for Liquid Metal Reactors

In-situ Thermophysical Measurement of Flowing Molten Chloride Salt Using Modulated Photothermal Radiometry

Electrochemical Monitoring for Molten Salt Pyroprocessing of Spent Nuclear Fuel: A Review

Electrochemical Sensors and Techniques for Redox Potential and Tritium Transport in a Neutron-Irradiated Molten Flibe Salt Loop

An absorption-based surface plasmon resonance sensor applied to sodium ion sensing based on an ion-selective optode membrane.

Data Fusion of Acoustic and Optical Emission from Laser-Induced Plasma for In Situ Measurement of Rare Earth Elements in Molten LiCl-KCl

Fiber-optic humidity sensor system for the monitoring and detection of coolant leakage in nuclear power plants

Research and design of a small self-heating high-temperature lithium plugging meter system