Abstract:Bismuth (Bi), as an impurity element in copper and copper-based alloys, usually has a strong tendency of grain boundary (GB) segregation, which depends on the GB characters. However, the influence of such a segregation on the properties of ultrahigh-purity copper has been rarely reported and the exact structural arrangements of Bi atoms at different GBs remain largely unclear. In this study, we investigated the influ-ence of trace amounts of Bi (50-300 wt ppm) on the ductility of an ultrahigh-purity copper (99.99999%) in the range of room temperature to 900 degrees C. The tensile results show that the addition of Bi seriously damages the ductility of the ultrahigh-purity copper at temperatures of 450-900 degrees C, which is due to the GB segregation of Bi. On this basis, such a segregation behavior at different types of GBs, including high and low angle GBs (HAGBs/LAGBs), and twin boundaries (TBs), via the scanning electron microscope-electron backscattered diffraction (SEM-EBSD) and aberration-corrected scanning transmission electron microscope (AC-STEM) investigations, combined with the first-principles calculations were systematically studied. The atomistic characterizations demonstrate an anisotropic Bi segregation, where severe enrich-ment of Bi atoms typically occurs at the HAGBs, while the absence of Bi adsorption prevails at LAGBs or TBs. In particular, the segregated Bi at random HAGBs exhibited the directional bilayer adsorption, while the special symmetrical E7 HAGB presented a unique Bi-rich cluster superstructure. Our findings pro-vide a comprehensive experimental and computational understanding on the atomic-scale segregation of impurities in metallic materials.(c) 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

The copper content of Guinier–Preston (GP1) zones in Al–1.84 at.% Cu alloy

Guinier-Preston zones observed by high-angle annular detector dark-field scanning transmission electron microscopy

Displacement fields around Guinier–Preston 1 zones in Al–Cu alloys: investigations using MD and ADF-STEM image simulations

Three-dimensional characterization of Guinier–Preston zones in an Al–Cu alloy using depth-sectioning technique

High resolution electron microscopy on the layered structures of GP zones in an Al-1.7at%Cu alloy

Direct imaging of Guinier-Preston zones by high-angle annular detector dark-field scanning transmission electron microscopy

Small-angle scattering from GP zones in Al-Cu alloy

Experimental examination of strain field within GP zone in an Al–Zn–Mg–Cu alloy

Role of Grain Boundary Character on Bi Segregation-Induced Embrittlement in Ultrahigh-Purity Copper

High-resolution transmission electron microscopy and tomographic atom probe studies of the hardening precipitation in an Al–Cu–Mg alloy

Optimal Arrangements and Local Anisotropy of {100} Guinier–Preston (GP) Zones by Parametric Dislocation Dynamics (PDD) Simulations

Unexpected Capture of Guinier-Preston Zone and Γ″ Phase in As-Cast Mg-Gd-Y-Zn-Ni-Mn Alloy: Atomic-scale Insights

Morphological evolution of GP zones and nanometer-sized precipitates in the AA2050 aluminium alloy

On the Guinier-Preston zones in selective laser melted AlSi10Mg alloy

Revisiting the precipitation mechanisms of Guinier-Preston zones, η′, and η precipitates in Al-Zn-Mg alloys

Atomistic modeling of nucleation kinetics of Guinier–Preston zones in Al–Cu alloys: Two formation scenarios and prediction of the time-temperature-transformation diagram

Structure of GP Zones in Al–Si Matrix Composites Solidified under High Pressure

Depiction of Different Alteration Zones Using Fractal and Simulation Algorithm in Pulang Porphyry Copper Deposit, Southwest China

Electron Structure and Interface Energy of GP Zone in Al-Zn Alloy

Atomic structures of ordered monolayer GP zones in Mg-Zn-X (X= Ca, Nd) systems

Strengthening of Al-Cu alloys by Guinier-Preston zones: predictions from atomistic simulations