Abstract:The common method for producing casting molds for the fabrication of polydimethylsiloxane (PDMS) chips is standard photolithography. This technique offers high resolution from hundreds of nanometers to a few micrometers. However, this mold fabrication method is costly, time-consuming, and might require clean room facilities. Additionally, there is a need for non-micromechanics experts, who do not have specialized equipment to easily and quickly prototype chips themselves. Simple, so-called, makerspace technologies are increasingly being explored as alternatives that have potential to enable anyone to fabricate microfluidic structures. We therefore tested simple fabrication methods for a PDMS-based microfluidic device. On the one hand, channels were replicated from capillaries and tape. On the other hand, different mold fabrication methods, namely laser cutting, fused layer 3D printing, stereolithographic 3D printing, and computer numerical control (CNC) milling, were validated in terms of machine accuracy and tightness. Most of these methods are already known, but the incorporation and retention of particles with sizes in the micrometer range have been less investigated. We therefore tested two different types of particles, which are actually common carriers for the immobilization of enzymes, so that the resulting reactor could ultimately be used as a microfluidic bioreactor. Furthermore, CNC milling provide the most reliable casting mold fabrication method. After some optimization steps with regard to manufacturing settings and post-processing polishing, the chips were tested for the retention of two different particle types (spherical and non-spherical particles). In this way, we successfully tested the obtained PDMS-based microfluidic chips for their potential applicability as (bio)reactors with enzyme immobilization carrier beads.

Evaluating Laser‐Based Microfabrication in Microfluidics: An Experimental and Computational Trial

Rapid Prototyping of Three-Dimensional Microfluidic Mixers in Glass by Femtosecond Laser Direct Writing

Innovative 3D Microfluidic Tools for On-Chip Fluids and Particles Manipulation: From Design to Experimental Validation

Low-cost Rapid Prototyping of Glass Microfluidic Devices Using a Micromilling Technique

An Alternative Micro-Milling Fabrication Process for Rapid and Low-Cost Microfluidics

Potential of CO2-laser processing of quartz for fast prototyping of microfluidic reactors and templates for 3D cell assembly over large scale

A Microfluidic Mixer of High Throughput Fabricated in Glass Using Femtosecond Laser Micromachining Combined with Glass Bonding.

A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components

Prototyping chips in minutes: Direct Laser Plotting (DLP) of functional microfluidic structures

Zweifach-Fung Microfluidic Device for Efficient Microparticle Separation: Cost-Effective Fabrication Using CO2 Laser-Ablated PMMA

Fabricating Microstructures on Glass for Microfluidic Chips by Glass Molding Process

Validation of Easy Fabrication Methods for PDMS-Based Microfluidic (Bio)Reactors

High Efficiency Integration of Three-Dimensional Functional Microdevices Inside a Microfluidic Chip by Using Femtosecond Laser Multifoci Parallel Microfabrication.

A Three-Dimensional Microfluidic Mixer of a Homogeneous Mixing Efficiency Fabricated by Ultrafast Laser Internal Processing of Glass

Rapid method for design and fabrication of passive micromixers in microfluidic devices using a direct-printing process.

Fabrication Of Microfluidic Devices In Silica Glass By Water-Assisted Ablation With Femtosecond Laser Pulses

Hybrid Laser Microfabrication of Three-Dimensional Large-Scale Fused Silica Microfluidic Chips

Fabrication and Numerical Analysis of PDMS Micromixer on Microfluidic Chip

Laser-Induced Thermal Bubble-Mixing on A Microfluidic Platform for Lab-On-A-Chip Applications

A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer

Computational-Aided Approach for the Optimization of Microfluidic-Based Nanoparticles Manufacturing Process