Abstract:Although inorganic all-solid-state Li-ion batteries (ASSLiBs) using stable oxide solid electrolytes are considered to be promising candidates for future energy storage devices, their relatively high cell impedance due to the restricted contact area and interfacial stability results in unsatisfactory electrochemical performance and fast capacity fading. The mechanism limiting performance and cycle life in such ASSLiBs still lack study and hence understanding. To overcome this bottleneck, we prepared a bulk ASSLiB, where a MnO2–CNT nanocomposite is used as a high-voltage anode to prevent reduction of the electrolyte by a lithium anode, high-voltage LiNi0.5Mn1.5O4 is used as a cathode, and ambient-air stable Li1.5Al0.5Ge1.5(PO4)3 (LAGP) is chosen as a solid-state electrolyte (SSE). This ASSLiB shows a maximum discharge capacity of 82 mAh g–1 at 0.15C and 23.8 °C. The electrochemical impedance study of the cell reveals a decrease in impedance after solid interface layer formation in cycle 1 followed by an increase after electrode lithiation/delithiation. Electrochemical evaluation and first-principles calculations were used to explore the decomposition of the LAGP after charge/discharge cycles. Decomposition of LAGP with the assistance of Li ions and free electrons from voids and grain boundaries leads mainly to the formation of Li4P2O7, Li3PO4, Ge5P6O25, AlPO4, and GeO. Finite element method simulations reveal that the volume expansion due to the formation of the decomposition products Li4P2O7, Li3PO4, and AlPO4 results in a maximum internal stress of 2.5–125 GPa for various Li excess ratios ranging from 0 to 6. This by far exceeds the failure stress of LAGP and results in crack formation and growth in the SSE on multiple cycling.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.1c01564.Characteristics of the MnO2–CNT nanocomposite; Nyquist plots; CV curve; TOF-SIMS preparation and characterization; SEM images; formation energy analysis of the LAGP decomposition products; FEM model and parameters; and cycle performance comparison (PDF)This article has not yet been cited by other publications.

Codependent failure mechanisms between cathode and anode in solid state lithium metal batteries: mediated by uneven ion flux

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

Failure Mechanism and Interface Engineering for NASICON Structure All-solid-state Lithium Metal Batteries.

Unraveling Interfacial Compatibility of Ultrahigh Nickel Cathode and Chloride Solid Electrolyte for Stable All-Solid-state Lithium Battery

Electromechanical Failure of NASICON-Type Solid-State Electrolyte-Based All-Solid-State Li-Ion Batteries

Electrochemical-Mechanical Coupling Failure Mechanism of Composite Cathode in All-Solid-State Batteries

Mitigating the Interfacial Degradation in Cathodes for High Performance Oxide-Based Solid-State Lithium Batteries.

In Situ Visualizing the Interfacial Failure Mechanism and Modification Promotion of LAGP Solid Electrolyte Toward Li Metal Anode

Chemomechanical Failure Mechanism Study in NASICON-Type Li1.3Al0.3Ti1.7(PO4)3 Solid-State Lithium Batteries

A Bifunctional Chemomechanics Strategy to Suppress Electrochemo-Mechanical Failure of Ni-Rich Cathodes for All-Solid-State Lithium Batteries.

Unraveling the interfacial compatibility of ultrahigh nickel cathodes and chloride solid electrolyte for stable all-solid-state lithium batteries

Insight into Cathode Surface to Boost the Performance of Solid-State Batteries

Electrochemo‐Mechanical Effects on Structural Integrity of Ni‐Rich Cathodes with Different Microstructures in All Solid‐State Batteries

Unraveling the Intra and Intercycle Interfacial Evolution of Li6PS5Cl‐Based All‐Solid‐State Lithium Batteries

Interface evolution of lithium metal anodes in all-solid-state batteries via mechanical–electrochemical investigations

Eliminating interfacial O-involving degradation in Li-rich Mn-based cathodes for all-solid-state lithium batteries.

Elucidating and Minimizing the Space‐Charge Layer Effect between NCM Cathode and Li6PS5Cl for Sulfide‐Based Solid‐State Lithium Batteries

Interface Degradation of LaCl3-Based Solid Electrolytes Coupled with Ultrahigh-Nickel Cathodes.

Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes

Unravelling the Chemistry and Microstructure Evolution of a Cathodic Interface in Sulfide-Based All-Solid-State Li-Ion Batteries