Abstract:Halide solid electrolytes have been considered as the most promising candidates for practical high-voltage all-solid-state lithium-ion batteries (ASSLIBs) due to their moderate ionic conductivity and good interfacial compatibility with oxide cathode materials. Aliovalent ion doping is an effective strategy to increase the ionic conductivity of halide electrolytes. However, the effects of ion doping on the electrochemical stability window of halide electrolytes and carbon additive on electrochemical performance are still unclear by far. Herein, a series of Zr-doped Li3–xEr1–xZrxCl6 halide solid electrolytes (SEs) are synthesized through a mechanochemical method and the effects of Zr substitution on the ionic conductivity and electrochemical stability window are systematically investigated. Zr doping can increase the ionic conductivity, whereas it narrows the electrochemical stability window of the Li3ErCl6 electrolyte simultaneously. The optimized Li2.6Er0.6Zr0.4Cl6 electrolyte exhibits both a high ionic conductivity of 1.13 mS cm–1 and a high oxidation voltage of 4.21 V. Furthermore, carbon additives are demonstrated to be beneficial for achieving high discharge capacity and better cycling stability and rate performance for halide-based ASSLIBs, which are completely different from the case of sulfide electrolytes. ASSLIBs with uncoated LiCoO2 cathode and carbon additives exhibit a high discharge capacity of 147.5 mAh g–1 and superior cycling stability with a capacity retention of 77% after 500 cycles. This work provides an in-depth understanding of the influence of ion doping and carbon additives on halide solid electrolytes and feasible strategies to realize high-energy-density ASSLIBs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c25087.SEM image and EDS mapping of the Li2.6Er0.6Zr0.4Cl6 halide SE; Nyquist plots of Li3–xEr1–xZrxCl6 halide SEs obtained from BM at different temperatures and halide SEs after heat treatment; XRD patterns of halide SEs after annealing; XRD pattern and ionic conductivity of LPSCl SE; equivalent circuit and the corresponding resistances of EIS spectra after cycling; and XPS spectra of LCO ASSLIB with VGCF before and after cycling (PDF)This article has not yet been cited by other publications.

Interface Degradation of LaCl3-Based Solid Electrolytes Coupled with Ultrahigh-Nickel Cathodes.

Unraveling Interfacial Compatibility of Ultrahigh Nickel Cathode and Chloride Solid Electrolyte for Stable All-Solid-state Lithium Battery

Unraveling the interfacial compatibility of ultrahigh nickel cathodes and chloride solid electrolyte for stable all-solid-state lithium batteries

Amorphous Chloride Solid Electrolytes with High Li-Ion Conductivity for Stable Cycling of All-Solid-State High-Nickel Cathodes.

Effects of Catholyte Aging on High-Nickel NMC Cathodes in Sulfide All-Solid-State Batteries

Mitigating the Interfacial Degradation in Cathodes for High Performance Oxide-Based Solid-State Lithium Batteries.

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

Unraveling the Intra and Intercycle Interfacial Evolution of Li6PS5Cl‐Based All‐Solid‐State Lithium Batteries

Elucidating and Minimizing the Space‐Charge Layer Effect between NCM Cathode and Li6PS5Cl for Sulfide‐Based Solid‐State Lithium Batteries

Degradation Rate at the Solid–Solid Interface of Sulfide-Based Solid Electrolyte–Cathode Active Material

Electromechanical Failure of NASICON-Type Solid-State Electrolyte-Based All-Solid-State Li-Ion Batteries

Enabling superior electrochemical performance of NCA cathode in Li5.5PS4.5Cl1.5-based solid-state batteries with a dual-electrolyte layer

Codependent failure mechanisms between cathode and anode in solid state lithium metal batteries: mediated by uneven ion flux

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batterie

F and N Rich Solid Electrolyte for Stable All‐Solid‐State Battery

SnF2‐Induced Multifunctional Interface‐Stabilized Li5.5PS4.5Cl1.5‐Based All‐Solid‐State Lithium Metal Batteries

Improved Interfacial Contact and Electrochemical Performance of Highly Ni-rich LiNixCoyMn1-x-yO2 (x>90%) Cathode in All-Solid-state Lithium Battery

Insight into Cathode Surface to Boost the Performance of Solid-State Batteries

Electro-Chemo-Mechanical Evolution at the Garnet Solid Electrolyte-Cathode Interface

New Insights into the Effects of Zr Substitution and Carbon Additive on Li 3– x Er 1– x Zr x Cl 6 Halide Solid Electrolytes

Dual modified NCMA cathode with enhanced interface stability enabled high-performance sulfide-based all-solid-state lithium battery