Abstract:Magnesium (Mg) alloys containing rare earths (RE) gained special attention as promising candidates for degradable implant applications. Cerium (Ce) is one of the RE elements which can be tolerated by the human physiological system when used as an alloying element in Mg alloys. In this current research work, Mg-Ce binary alloys (0%, 0.5%, 1%, 1.5%, and 2% Ce by weight) were prepared by the stir-casting method. The developed alloys were characterised, and corrosion performance was assessed by immersion experiments in normal saline solution and by electrochemical experiments. The degradation rate of the developed alloys was measured as decreased with the increased Ce content up to 1.5%. From the polarisation studies, lower corrosion current density values 3.5 × 10 −5 A/cm 2 and 4.1 × 10 −5 A/cm 2 were observed for Mg-1.5%Ce and Mg-2%Ce alloys, respectively compared with the other samples. The surface morphologies after removing the corrosion products revealed more degraded regions for Mg and alloys with lower Ce content (0.5% and 1%) compared with 1.5% and 2% Ce. From the results, it is concluded that developing an Mg-Ce alloy with an optimum fraction of Ce (1.5%) is promising to produce degradable Mg-based medical implants with controlled degradation. Récemment, les alliages de magnésium (Mg) contenant des terres rares (TR) ont retenu une attention particulière en tant que candidats prometteurs pour les applications d'implants dégradables. Le cérium (Ce) est l'un des éléments de TR qui peuvent être tolérés par le système physiologique humain lorsqu'il est utilisé comme élément d'alliage dans les alliages de Mg. Dans ces travaux de recherche en cours, on a préparé des alliages binaires Mg-Ce (0%, 0.5%, 1%, 1.5% et 2% Ce en poids) par la méthode de coulée avec agitation. On a caractérisé les alliages développés et l'on a évalué leurs performances à la corrosion par des expériences d'immersion dans une solution saline normale et par des expériences électrochimiques. On a mesuré la vitesse de dégradation des alliages développés comme diminuant avec l'augmentation de la teneur en Ce jusqu'à 1.5%. À partir des études de polarisation, on a observé des valeurs de densité de courant de corrosion plus faibles de 3.5 × 10 −5 A/cm 2 et de 4.1 × 10 −5 A/cm 2 pour les alliages Mg-1.5%Ce et Mg-2%Ce, respectivement, par rapport aux autres échantillons. Les morphologies de surface après l'élimination des produits de corrosion ont révélé des régions plus dégradées pour le Mg et pour les alliages à plus petite teneur en Ce (0.5% et 1%) contre 1.5% et 2% de Ce. À partir de ces résultats, il est conclu que le développement de l'alliage Mg-Ce avec une fraction optimale de Ce (1.5%) promet de produire des implants médicaux dégradables à base de Mg avec une dégradation contrôlée.

Bio-properties of Mg-RE alloys: an applied study on cytotoxicity and genotoxicity

Comparative in vitro study on binary Mg-RE (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) alloy systems

Cellular response to rare earth mixtures (La and Gd) as components of degradable Mg alloys for medical applications

A review of the physiological impact of rare earth elements and their uses in biomedical Mg alloys

Effect and Application of Rare Earth Element in Magnesium Alloys

Corrosion behaviour of the magnesium-cerium binary alloy designed for degradable medical implants

Study of the microstructure and mechanical properties of Mg-rare earth alloys

Biomedical rare-earth magnesium alloy: Current status and future prospects

Effects of extract solution from magnesium alloys supplemented with different compositions of rare earth elements on in vitro epithelial and osteoblast progenitor cells

Research progress on corrosion behaviors and biocompatibility of rare-earth magnesium alloys in vivo and in vitro

Effects of novel Mg-RE master alloys prepared via ultrasonic assisted cast on the microstructure and properties of Mg-Gd-Y alloy

Synergistic Effects of Cerium-Based Rare Earth Addition and Hot Deformation on the Microstructure and Mechanical Properties of Mg-0.5Zn-0.5Zr Magnesium Alloy

Modification of the Tensile Performance of an Extruded ZK60 Magnesium Alloy with the Addition of Rare Earth Elements

In Vitro and in Vivo Studies on Biomedical Magnesium Low-Alloying with Elements Gadolinium and Zinc for Orthopedic Implant Applications

Research Progress on Microstructure and Mechanical Properties of Medical Rare-Earth Magnesium Alloys

On the corrosion of binary magnesium-rare earth alloys

Design of single-phased magnesium alloys with typically high solubility rare earth elements for biomedical applications: Concept and proof

Effects of Different Rare Earth Elements on the Degradation and Mechanical Properties of the ECAP Extruded Mg Alloys

Microstructure and Thermal Conductivity of As-Cast and As-Solutionized Mg–Rare Earth Binary Alloys

Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying

Structure And Mechanical Properties Of Mg-Zn-Re System Alloys